Product Details
How to use Pla'vann
A long-term neocollagenesis filler that lasts more than a year and a half, which slowly fills the skin with collagen to maintain a natural volume.
PLA (Poly-lactic acid) + CMC (Carboxymethyl cellulose)
365 mg x 1 vial (5 ml)
Treatment area:
Wrinkles and folds on the face
Purpose of use:
Olidia is indicated for use in adults without contraindications for use as a single treatment for the correction of both shallow and deep defects (nasolabial furrows) and other expression lines.
How to use:
Before the treatment with Olidia, please follow the instructions on the leaflet.
* Treatment with this product should be performed using a linear technique.
Shelf life: 36 months from the production date
Treatment: 3 treatments at intervals of 1 month
Olidia® is the collagen stimulator made from Poly-L-Lactic Acid material which generates new collagen under the skin and increasing own volume naturally.
The volume made by Olidia® is your own part of body and lasts more than two years.
CE approved
Olidia® is certified in Europe with CE marking.
It means Olidia ® has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements.
Safety
PLLA is a biocompatible, biodegradable polymer which is breaked down to Co2 and H2O after certain time
Quick treatment time
Treatment time is less than 20mins depends on the area.
Good satisfaction
Less painfulness & the short down time makes the high satisfaction of Olidia® treatment.
Improves
wrinkles & Volumizing
Olidia® increases volume through stimulating collagen.
This owned created protein replace your lost collagen and improves patient's wrinkles.
Applicable area of Olidia®
Injected Olidia® stimulates and generates collagen under the skin and restore the volume for facial area. It naturally helps to reduce fine line wrinkles and present youth looking.
| Brands | Sculp, Olidia, Aesthefill, Etrebelle, Sculp 5D |
| Ingredient | Poly-L-Lactic Acid |
Olidia plla filler with CE
It is a durable and safe collagen stimulator.
Olidia® is an injectable dermal filler based on poly L-lactic acid with CE. This filler has been developed to fill in the lost volume on the face by stimulating collagenesis. The main ingredient of Olidia® is PLLA. PLLA has been used around the world for over 20 years in medical devices, e.g. for dissolving sutures. As Olidia® is made of synthetic materials, there is no need for allergy testing before the procedure.
What is PLLA?
It is poly-L-lactic acid (PLLA) is a biocompatible and biodegradable polymer. PLLA particles stimulate fibroblasts to produce collagen, while the newly formed collagen creates volume. After administration, PLLA is absorbed and degraded, thereby eventually undergoing respiration as Co2.
PLLA is the most durable dermal filler of all currently FDA approved biodegradable products. In 80% of respondents, it lasted for about 24 months.
Main Composition : PLLA(poly L-Lactic acid)
Packaging: 365mg/vial, 1vial/box
Indications: Narrow area(nasolabial folds, nose, chin, forehead, frown, tear through, malar), Wide area(cheek temple etc.)
Efficacy: Stimulate collagen generation
Expiry date: 3 years
Storage: Store at room temperature below 30ºC. It is forbidden to be frozen.
How To Use:
- Remove the cap of Olidia. (Make sure to check whether the product package is damaged or broken.)
- Wipe its rubber stopper with an antiseptic. When the aluminum cap or rubber stopper of the vial is damaged do not use the product.
- Connect an 18G sterile needle to a 10ml sterile single use syringe as shown. (5ml syringe also fine)
- Slowly fill 5ml to 7ml saline water into the 10ml single use syringe.
- Slowly add the sterile water into the vial. At this time pierce the rubber cap with the 18G needle at once.
- Leave the reconstituted solution in the vial for maximum 2 hours to dilute.
- Keep in mind not to shake the vial. The reconstituted solution must be immediately used. After reconstitution, any non used or remaining reconstituted solution must be discarded.
- Just before treatment to patients, Shake the reconstituted solution for better suspension. Olidia solution will be look white and translucent.
- Reconstituted solutions should be within 72hours. Any non used reconstituted solution must be discarded.
- For the tips for general clinic, Just before Olidia treatment to the patient, we can add 1ml to 2ml of lidocain.
Q: Can I pay by credit card?
A: Certainly.
Q: When will you arrange the dispatch once I paid you?
A: Shipped in 3 days after payment .
Q: Which courier or agent do you use?
A: Usually, we use DHL, EMS, FED, UPS, TNT some international courier.
Q: How long can we receive it ?
A: About 3-10 days,but about 10-20 days by ePacket.