Product Details
Features
- Diffuse reflection type with background suppression function
- Non-sphere optical lens totally eliminate stray light and special optical structure has strong light resistance
- NPN/PNP output can be selected
- LIGHT ON/DARK ON can be selected
- Protection rating IP67 with the complex process
- Built-in reverse polarity protection, over-voltage protection, short-circuit protection
- The wiring outlet is integrally formed, and the sealing performance is better
| PF21B Diffuse Photoelectric Sensor | |||
| Model | PF21B-150A | PF21B-350A | PF21B-900A |
| General parameters: | |||
| Working Principle | Background suppression | ||
| Sensing Range | 2~150mm | 5~350mm | 5~900mm |
| Light Source | PinPoint-LED, visible red light | LED, red light; Laser, infrared light | |
| Wavelength | 630nm | 630nm,940nm | |
| Spot Diameter | Φ6mm @150mm | Φ6.6mm @350mm | LED:Φ23mm@500mm Laser:Φ16mm@500mm |
| Electronic Parameters: | |||
| Operating Voltage | 10~30VDC | ||
| No-load current | Emitter <20mA; Receiver <15mA | ||
| Output Current | <100mA | ||
| Voltage Drop | <1.5V | ||
| Response time | <1.25ms | <2.5ms | 120ms |
| switching frequency | 400Hz | 200Hz | 8Hz |
| Mode of Action | Light on, dark on, light/dark on switching, according to model selection | ||
| protection circuit | Reverse polarity protection, short circuit protection | ||
| Indicator | Power is the green indicator, output is the yellow indicator | ||
| Control output | Transistor output, NPN/PNP according to model selection | ||
| Mechanical parameters: | |||
| Appearance Size | 12mm×33mm×21.5mm | ||
| Shell Material | ABS+PC | ||
| Lens Material | PMMA | ||
| Connection Type | 2m cable; M8 connector; The M8 connector with 300mm cable |
||
| Cable Diameter | Φ3.4mm | ||
| Conductor Cross Section |
0.14mm² | ||
| Environmental Parameter: | |||
| Ambient brightness | Sunlight 100000Lux; Incandescent lamp 3000Lux | ||
| Operating Temperature |
-25~55ºC | ||
| Storage Temperature | -30~70ºC | ||
| Protection rating | IP67 |
Product self-inspection steps
1. Detect whether the installation position of the object and the proximity sensor has deviated, slacked, or skewed; whether there is slack, poor contact, or disconnection in the wiring and connection parts2. Whether there is adhesion or accumulation of metal dust, etc.
3. Is there any abnormality in using temperature conditions and environmental conditions?
4. Set whether the flashing of the display lamp type is abnormal.
Suppose you must be careful not to disassemble and repair by yourself during the inspection, and to easily find out the fault. In that case, you can investigate the operating state of the sensor through the connection with the portable detector, and then repair it according to the situation.
In order to make the photoelectric sensor work stably for a long time, it should be regularly checked with the same contents as the general control equipment to maintain its long-term function. The photoelectric sensor can also be stocked. Once a problem with the photoelectric sensor is found, we can replace it in time without affecting the use of the sensor.
Tianjin G-TEK sensor technology co.,ltd was established in 2014 in Xiqing District, Tianjin City and it will fully inherit and expand the original G-TEK automation business with the construction and operation of the new R&D and manufacturing base.
Q: Is the product shipped and arrived fast?
A: The production cycle for large quantities of products takes 15-30 days, depending on the product.
Q: Can you provide professional advice promptly?
A: We have a professional technical team that can patiently help you answer all professional questions.
Q: Can you provide customized products/services?
A: Yes, we can provide customized products, but the customization needs to meet a certain quantity.
Q: How is the quality of the product? Is the quality stable?
A: G-TEK Sensors has been focusing on the sensor field for 23 years. The quality of the sensor has the double affirmation of the CE certificate and customer reputation.
Q: What is your MOQ?
A: We offer MOQ per piece; it depends on your specific order.
Q: Is there any relevant terms of service and warranty information?
A: We offer a warranty on all items. The sensor products are guaranteed for 15 months, and the light curtain and lidar products are guaranteed for 18 months. For after-sales questions, you can directly contact the product salesperson.
Q: Is there any relevant information available for download on the website?
A: Yes, if you want to download the relevant product manual, you can go to our official website to download it.
Q: Can I be your reseller?
A: Yes, we are looking for distributors in overseas markets.