Multi-span uv coating polycarbonate/PC Board tunnel hydroponics agriculture/commercial greenhouse
PC sheet greenhouse usually is Venlo type ( also can be circular arch ), and often use the form of multi span. It has the character of modern appearance, strong structure, moderate light transmittance, remarkable heat preservation performance, large water displacement, strong anti-wind ability, suitable for large wind and rain area.
1. Light transmission of PC sheet can reach to 89%.
2. Impact strength of PC sheet is 250-300 times of common glass.
3. PC sheet has UV-proof coating.
4.Light weight:save cost of transportation,unloading,installation and support framework.
5. The flame retardant is B1 level.
6.Bend-ability:can cold bending in construction site according to the drawing.
7. PC sheet has obvious insulation effect.
8.Energy saving:keep cool in summer,preserve heat in winter.
9.Weather resistance:when temperature is low,not cold short,when temperature is high,not soften.
10.Prevent dewing:when indoor relative humidity is under 80%,the inner surface of the material does not condensation. Dew will run off along the plate surface,not dripping.
| Polycarbonate Sheet greenhouse|
|Eaves height(From sink to ground)||3.0m~8.0m|
|Snow load ||0.30KN/m2|
|Dead load ||20KG/m2|
|Specification and dimension|
|Structure||The south and north sides of Greenhouse are gables, the east and west sides are side walls.|
|Column space||4.0m||Around the dado height||0.5m|
|Eaves height||4.0m||Ridge height||5.0m|
|Outside shading height||5.5m|| || |
Greenhouse Optional System
Customers can choose these greenhouse system according to your needs!
|Optional greenhouse system|
|Cooling system||Cooling fan and cooling wet curtain|
|Shading system||Outside shading and inside shading system (It is better to reduce sunlight and temperature.)|
|Ventilation system||Roof vents and side vents.|
|Hydroponic system||Applicable to leaf vegetables and fruit planting|
|Heating system||Boiler and heating fan|
|Irrigation system||Drip irrigation/sprinkle irrigation/mist spray|
|Control system||Control cabinet|
|Other system||Light system/Seedbed/CO2 system|
Company Introduction1. Our factory has been engaged in greenhouse production for more than 10 years, has a wealth of production and construction experience and technology.
2. Our factory has project design, construction and project management capabilities, to provide customers with a better purchase experience.
3. Our factory according to the needs of customers design the best program, in the premise of high quality for customers to save costs and increase customer efficiency.
4. Our factory offers a one-year warranty. After the warranty period, we will still be the most reasonable price to provide replacement of greenhouse accessories.
T/T , L/C and Western Union.
A deposit is an advance payment of 40% of the value of the goods,
the remaining 60% will be paid before shipment.20 days after receipt of deposit.
1.Equipment using carton packaging.
2.Steel frame bulk.
3.Accessories are packed in packing bags.
4.Can also be packaged according to customer requirement.
1. Our greenhouse exports to more than and 20 countries.
2. Multinational customers to visit our factory many times, and expressed satisfaction with our products.
3. We accept the custom of small area and large area of greenhouse.
FAQ1.Q: As we have different type equipments, please indicate following details in your inquiry email.
A: (1) The specific area (L*W)
(2) Product usage/system type
(3) The requiement of covering, structure,material, temperature, humidity and light intensity.
These are very important for providing you a complete solution.
2.Q: What is the minimum order quantity?
A: The minimum order quantity is 3000 square meters.But if below 3000 square meters,we also can produce it.The price is adjusted according to the quantity of order.
3.Q: Are you a manufacturer or trading company?
A: We are a manufacturer, and produce these equipment that has more than ten years of experience. All you are warmly welcomed to visit us!