Tangshan, Hebei, China
Member Since: 2019
Business Type: Manufacturer/Factory
1. The bond property between anti-corrosive coatings is strong and the integrity of pipeline is high.
4.High Density Polyethylene
3PE anti-corrosive pipe,
Inner coated single layer FBE anti-corrosive pipe,
outer coated single layer FBE anti-corrosive pipe,
outer coated double layer FBE anti-corrosive pipe,
FBE anti-corrosive polyurethane insulation pipe
petroleum, gas, Reclaimed water transportation, chemical medium transport, water project
1. 3PE anti-corrosive pipe
2. FBE anti-corrosive pipe
1. Guangxi Zhong Energy Saving Building Energy Saving Co., Ltd. Anti-corrosion Pipeline Project.
2. Nanning centralized energy supply project
3. Natural Gas Pipeline Project in France
Specification of Thickness of Anti-corrosive Coating
|Adhesive layer(μm)||Minimum thickness on the coating(mm)|
|Common level(G)||Strengthen level(S)|
Indexes of epoxy powder
|1||size distribution(%)||150μm oversize powder <=3.0|
250μm oversize powder <=0.2
|4||Gel time(200ºC)/(S)||>=12confirm to the requirement±20%|
Indexes of fusion bonded epoxy coating
|4||counter bending(-20ºC,2.5°)||no cracks|
Indexes of adhesive
|3||vicat softening point|
|5||· oxidation induction time(OIT)|
|6||· moisture content|
|8||elongation at break|
Indexes of polyethylene
|1||tensile strength||· axial|
|2||· elongation at break|
(50ºC or 70ºC)
|4||loop tensile stress cracking resistance|
Indexes of anti-corrosive layer
|Two layer||Three layer|
>=70 (cohesive failure)
|2||· cathodic disbonding|
|3||· cathodic disbonding|
(the highest temperature,30d)/(mm)
|5||· counter bending|
Xingbang plumbing is the participated unit of the New National Standard in China's insulation pipe industry.
We have participated in formulating three sets national standards:(GB/T28638-2012, GB/T29046-2012, GB/T29047-2012).We have gained ISO9001 International Quality Management System, ISO14001 Environment Management System, GB/T28001 Occupation Health Safety Management System.
1: Are you a manufacturer or a trading company?
We are a manufacturer which has more than 2 0 years' history.
2: Where is your manufacturer? How to visit it?
Our factory located in Yutian Economic Development Zone ,TangShan , China. A bout 1.5 hours drive time to Beijing and TianJin airport . Mainly producing pre-insulated pipes, HDPE outer protection pipe and 3PE anti-corrosive pipe.
You can take a plane to Beijing or Tianjin .then we could pick up you at the airport .
3: How do we control our products' quality?
We have professional quality control workers and quality inspection center(CNAS lab) to control the entireproduction quality.
4: How do you transport these products?
We use straps to hoist pre-insulated pipes, it can avoid no damage to our products, no hooks for lifting pipedirectly. During the handling process, collision, tossing and more ground drag scrolling are strictly forbidden.
In the process of long distance transport, the pipes should be fixed, and not damage outer protecting pipesand insulating layers.
5: Can I customize some other sizes of products?
Yes! We can according to the customer's request.
If you have any other questions, please don't hesitate, contact us.