Factory Supply Single Phase TTL Modbus Ammeter Kwh Meter
This document describes the specification of the PZEM-004T AC communication module, the module is mainly used for measuring AC voltage, current, active power, frequency, power factor and active energy, the module is without display function, the data is read through theTTL interface.
Very Important Notification:
For this product PZEM-004T, we have the update version to replace the old version. The old version has been sold out and no produce anymore. The update information as following:
1. the new version has the same size and TTL port as before
2. the software is new, we have English software as same as the PZEM-014,016, The communication protocol change to be Modbus-RTU, the display interface is changed. now it can test Voltage ,Current, Power, Power factor, Frequency and Energy 6 parameters.
3. the new version has higher precision, faster refresh speed and the more stability communication than the old version.
4. The new version increase a set for 0-10A
5. Now the product is still naked PCB, but in the future we will have the good outside case.
Now you can still use the old link to submit the order, if there is any question, welcome to contact the service to get more information.
|Test Range||1. Voltage: 80~260V|
2. Current: 0~100A
3. Power: 0~22kW
4. Energy: 0~9999kWh
split CT+USB cable, without the outbox
Measuring range: 0~100A(PZEM-004T-100A)
3 Active power
Measuring range: 0~23kW(PZEM-004T-100A)
4 Power factor
Measuring range: 0.00~1.00
Measuring range: 45Hz~65Hz
6 Active energy
Measuring range: 0~9999.99kWh
Physical layer use UART to RS485 communication interface
- Communication protocol
- Physical layer protocol
Baud rate is 9600, 8 data bits, 1 stop bit, no parity
The application layer use the Modbus-RTU protocol to communicate. At present, it only supports function codes such as 0x03 (Read Holding Register), 0x04 (Read Input Register), 0x06 (Write Single Register), 0x41 (Calibration), 0x42 (Reset energy).etc.
- Application layer protocol
0x41 function code is only for internal use (address can be only 0xF8), used for factory calibration and return to factory maintenance occasions, after the function code to increase 16-bit password, the default password is 0x3721
The address range of the slave is 0x01 ~ 0xF7. The address 0x00 is used as the broadcast address, the slave does not need to reply the master. The address 0xF8 is used as the general address, this address can be only used in single-slave environment and can be used for calibration etc.operation.
The command format of the master reads the measurement result is(total of 8 bytes):
- Read the measurement result
Slave Address + 0x04 + Register Address High Byte + Register Address Low Byte + Number of Registers High Byte + Number of Registers Low Byte + CRC Check High Byte + CRC Check Low Byte.
The command format of the reply from the slave is divided into two kinds:
Correct Reply: Slave Address + 0x04 + Number of Bytes + Register 1 Data High Byte + Register 1 Data Low Byte + ... + CRC Check High Byte + CRC Check Low Byte
Error Reply: Slave address + 0x84 + Abnormal code + CRC check high byte + CRC check low byte
Abnormal code analyzed as following (the same below)
- 0x01,Illegal function
- 0x02,Illegal address
- 0x03,Illegal data
- 0x04,Slave error
Q: Can I get better price?
A: Prices are different for different order quantity and specific demands. We would like to offer you very good price to help you enlarge the market share.
Q: Are factory or only company?
A: We are factory of AC DC digital panel meter .
Q: How about the shipping cost?
A: If your goods is small for LCL, we can send goods to you via counier, such as FEDEX,TNT,there is good rate from our side.
If your goods is FCL, it need be sent via sea, we can send you frieght quotations DDU or FOB,CIF, you can choose whether use our forwarder or yours.
Q: How about the sample time? What is the payment?
A: You can come to my official store in aliexpress to place the sample order, we will ship it out with in 3-5 days after the payment.
T/T, alibaba trade assurance etc,we can talk all the possibilities.
Q: Is your product in good quality?
A: The quality is depended on the price.And it is better to purchase the sample to test the quality first,then place an order.
Q: Could you make OEM with our logo?
A: Yeah,we have factory to produce the goods to you with your own logo..It depend on your quantity.
Q: Why do I choose you?
A: 1): Reliable---we are the real company, we dedicate in win-win
2): Professional---we offer the newest digital panel meter.
3): Factory---we are the manufacturer, so we have the Stable product source,reliable technical support and reasonable price
Q: Where is your Loading Port?
Other China port is accepted.
Q: How to control Quality of Mass?
A: We have our own QC Team (5 workers). Every step of mass production will be inspected in time.
Q: How long will you guarantee the mass quality?
A: We will be responsible for our mass even the mass are in your warehouse. We Trust our Quality.
Almost more than 95% clients will cooperated with us for long time from 1st order.
Q: Is there any tracking Number for my order?
A: Yes, after we ship the cargo, we will provide the tracking number for your order to you, and
you can view the shipment status on the corresponding shipping company website.
Q: Do you offer retail service?
A: Yes, we have an official store on aliexpress, If you need retail service you can come here.
Q: Can we visit your factory?
A: Sure, our factory is in Ningbo. Pls let us know when you come, we will pick up you at airport.