Light Weight, High Strength, Heat Preservation, He
Capacity from 30000 to 500000sqm/yaer
Horizontal type of forming machine
Our improvement on horizontal mould car
1. The ribs are added on the outside to ensure the flatness of the wallboard.
2. The welding process has been improved to ensure that the welding will not be carried out and the strength of the welding is strengthened.
3. The position of the upper and lower molding table is improved, and it is level with the partition and easy to operate.
4.As shown in the figure, one side is fixed by a steel pipe and the other side is supported. This prevents the blocking plates on both sides from inclined when changing the length. 5.The upper screw comparision , the screw is changed into the handle, the left picture is the old-style blue screw. The screw is needed for fixing. The picture on the right is the updated one. It is pressed directly with the handle, which makes the installation more convenient and quick.
Different forming method
First forming method If the mould car is fixed ,there are two different way for casting , the first method :After mixing ,casting the slurry into the second storage hopper .The mobile pouring car will carry the second storage hopper and pumping system move to the mould car along running rail.then the workers pouring/casting the slurry into the mould car ,it will take around 7 to 10 minutes . ,after pouring ,the panel need curring in the mould car for 8 hours .
Second forming method
If build a walking frame above the mould car , the secondary storage hopper will move along the frame and pour the slurry into the mould car, after pouring ,the workers will scrape the slurry flat with scraper and then curing the panel in the mould car for 8 hours .
Third forming method
If the mould car quantity more than 15sets ,then we adivse mould car movible ,after mixing ,pouring the slurry into the second storage silo ,then pouring into the mould car ,and the workers will scrap the slurry flat using scraper after that , the mould car will move to the curing area by PLC control the move and the convesion device change the direction . there curing 8 hours .
Automtic demould system
Introduce : it include two parts automatic opening and closing machine and automatic demoulding machine . Process:Firstly use opening and closing machine to open the moulds then use the demoulding machine to pull out the panel then put them together and turnove them so as the forklist to move the panels
* Full life-cycle value services: Our company provides production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support
*All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
*Complete data specification: we provide production line equipment technical data and instructions.
*Quality commitment: The company regards product quality as the lives of enterprises, the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology, so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.