Ningbo, Zhejiang, China
Business Type: Manufacturer/Factory
The ultraviolet lamp clean in the UV-C band of 254nm. Because the resonance spectrum of mercury is 2537A, the 254nm ultraviolet light generated by the ultraviolet clean lamp denatures the DNA and RNAV of bacteria and viruses, and bacteria cannot reproduce. Ultraviolet lamp is effective for any bacteria or virus. High-intensity ultraviolet rays can be killed in a short time, which belongs to physical cleaning. Unlike chemicals, there are residues and side effects.
1) During the use of germicidal lamps, it is forbidden to include people / animals and plants to avoid burns caused by ultraviolet rays directly irradiating human skin and eyes (it can only be entered after use).
2) Avoid hitting and cracking the UV lamp. If it breaks, immediately shut down and unplug the power.
3) It is recommended to replace the ultraviolet lamp tube after consulting the merchant to guide the replacement.
1) Connect the power supply, the lamp will automatically flash to test after power-on, to ensure that the circuit is normal (power-on detection function)
2) Normal switch / touch switch button, the device starts. (Turn on the buzzer prompt, start with a delay of 10 seconds)
3) After starting up, you can select the corresponding area for cleaning (different areas simultaneously represent different timing times), and the time will stop automatically
4) After starting, wait for 10 seconds and start, (people leave the area during this period)
5) If it has a radar function, it will automatically shut down after being detected by personnel, and start automatically 10 seconds after leaving.
6) Radar detection is more sensitive (such as people or animals in the wall, automatically stop). In this environment, the radar can be turned off (if the radar function needs to turn off the radar monitoring function, first turn off the power, long press the set button to complete the radar off function, turn on This function is the same way).
1) Do not look directly at the UV light source, and use it without a person, because ultraviolet radiation may cause skin erythema, eye conjunctiva irritation, and fatigue easily (note: during the use of clean lamps, personnel / animals / plants are strictly prohibited, after turning off Before entering to avoid burns).
2) During use, the surface of the UV lamp should be kept clean, and the surface should be wiped frequently (generally once every 2 weeks or so) to remove dust and oil on the surface to reduce the impact on UV penetration and affect the clean effect.
3) When clean indoor air with ultraviolet light, the room should be kept clean and dry to reduce dust and water mist. When the indoor temperature is lower than 20 ºC or higher than 40 ºC. The irradiation time should be properly extended. When clean the surface with ultraviolet light, the irradiated surface should be directly irradiated within the ultraviolet lamp, otherwise the irradiation time needs to be increased.
4) Disinfect pets or pet houses, please make sure that pets will not touch and clean the lamp to avoid pet burns
5) After , it should be stored well to avoid injury caused by misuse of children
6) After clean the room, please open the window and ventilate for 10 minutes immediately.
Ultraviolet virus Lamp
intelligent electronic timing
Remote control mode:
15m wireless wall
Lamp life :8000 hours
Use area :36W for 40m2/55W for 60m2
Home use is recommended for 30 minutes each time, about 2 times a week (special periods are self-determined)
Source: UV-C band 253.7nm