Introduction: Swing turnstile has standard electrical interface which can be connected with ID cards, IC cards, magnetic cards, barcode cards etc. The integration system ensures passing in order and will never allow unauthorized persons to go in or go out. Parameters: Power Supply: AC220V &plusmn; 10V, 50Hz / AC110V &plusmn; 10V, 60Hz Power Consumption: DC24V 60W Temperature: -25 to 75&ordm;C Humidity: <95%, without concretion Passage Width: <=1000mm Passing Speed: 30 persons/min (normal open), 20 persons/min (normal close) Arm Open/Close Time: 2.5s Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA Communication Interface: RS485 (Distance: <=1200m), TTL232 Dimension: 1400*180*1020mm Arm Length: <=500mm Working Environment: Indoors or outdoors with shed Arm Turning: Bi-direction Main Functions: 1. Problem-self-checking function. 2. Arm Turning: Bi-direction. 3. When power off, arm open automatically and power on again, arm will be held automatically. 4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel. 5. Auto-reposition function: After card read, passenger doesn't pass within regulated time, turnstile will cancel order automatically. And the regulated time can be set by managers. 6. Anti-rush function: if there is no open single, arm will be holding tightly. 7. Stable running with little noise.