Automatic Electric Progressive Grease Lubrication Pump System for Lathe Electric Grease Lubrication Pump Piston Pump : Performance and characteristics 1,The lubrication pump duty cycle can be controlled by the host PLC or a separate controller. 2,It is equipped with a pressure regulating valve device, which can independently set the working pressure of the lubrication pump to ensure its safety. 3,An exhaust valve device is provided to eliminate air from the lubrication pump chamber and ensure lubrication pump drain unblocked. 4,With low oil level transmitter, normally open contacts or normally closed contacts can be selected according to the system. 5,Use a grease gun to add grease to the lubrication pump reservoir through a grease filter to avoid impurities and air into the lubrication system to improve the lubrication system. 6,The lubrication system is equipped with a pressure switch, which can effectively monitor the pipeline system to interrupt the flow, leakage and other pressure shortage phenomenon. 7,A spring-loaded oil pan is used for vacuum suction. 8,No pressure relief valve device in progressive system, used with GFA/GFB/GFC/GFD/GFE distributor(refer to pages 53~58). model maximum ejection pressure Thoughout(cc/min) oil outlet diameter oil tank volume motor power oil viscosity GEN-122 8.0MPa 20 ϕ 6 2L 35W 000#-1# GEN-129 8.0MPa 20 ϕ 6 2L 25w 000#-1# Why choose us BAOTN Intelligent Lubrication Technology (Dongguan) Co., Ltd. has developed into one of the well-known professional manufacturers of mechanical centralized lubrication systems in China. Founded in August 2006