HY154 POLYISOBUTYLENE BIS-SUCCINIMIDE ASHLESS DISPERSANT Lubricant Additives (1)product Description This product is made from high active polyisobutylene and produced by thermal adduction process,with excellent low temperature detergency capability and good solubility of high temperature,Can inhibit the formation of carbon and paint film at engine pistonsoot. It can be widely used in modulating internal combustion engine oil.it has preferable compatibility with antioxidant and corrosion inhibitors. (2)Product Application Used for blending low and middle grade engine oil, Also can be used for petrochemical aid and fuel detergent, (3)Recommended Dosage Recommended Dosage (wt%):2.0%-4.0% (4)Product Parameters ITEM Typical Value Test Methods Kinematic Viscosity (100ºC) mm2/s 150-250 GB/T265 TBN mg KOH/g 15-30 SH/T0251 Flash Point (COC), ºC 170 min GB/T 3536 Nitrogen, wt% 1.1-1.3 SH/T0224 Density (20ºC) Kg/m3 890-935 GB/T1884 Chromaticity (dilution) 7.0 max GB/T6540 Water, wt% 0.10 max GB/T260 This information is based on our current experience. It is presented in good faith, but is not intended to guarantee any special properties. The consumer must independently verify that there are no circumstances requiring additional information, precautions or clarification of the data provided here. ABOUT US