Product Description Biomass Charcoal Making Machine Product Introduction Biomass two-layer continuous drum carbonization machine is a piece of special carbonization equipment that can carbonize coconut shell, walnut shell, apricot shell, hemp pole, sawdust, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, medicine residue, furfural residue, coffee residue, palm shell, peanut shell and sunflower seed shell in the carbonization machine under high-temperature conditions. The carbonization machine adopts the advanced technology of recovery, purification and circulating combustion of carbon monoxide, methane, ethane and other combustible gases produced in the process of carbonization. It solves the problem of environmental pollution caused by thick smoke which produced by ordinary carbonization furnace in the carbonization project, and solves the heat energy problem required by the equipment, fully realizes self-sufficiency, and improves the continuity and economy of the equipment We should make full use of the agricultural and forestry residues to turn waste into treasure and contribute to the greening environment. Jiutian biomass charcoal briquetting production line includes: pulverizer, dryer, carbonization furnace, briquetting machine. Can be adjusted according to customer requirements. Continuous Carbonization Furnace Working Principle Biomass two-layer continuous drum carbonization machine is professional equipment for continuous high-temperature heating and carbonization of biomass under the condition of no oxygen and poor oxygen. It is composed of two-layer carbonization machine, preheat wood powder burner (or gasifier, natural gas burner), combustible gas purification device, external heating furnace of carbonization machine, feeding conveyor, cooling and carbon discharging machine and control, etc In this paper. The biomass is transported into the inner drum by the conveyor. The waste heat in the furnace is used to dry and preheat the materials to 200-250 ºC. The outer drum is provided with a combustible gas recovery pipeline at the end. The combustible gases such as carbon monoxide, methane and ethane produced in the carbonization process are fully utilized to separate wood tar, wood acid solution, water and ash through the flue gas purification system The pure combustible gas is sent to the heating furnace outside the carbonization machine for full combustion and heating to the carbonization machine to achieve reciprocating cycle heating and continuous production. The carbonization temperature is generally controlled at / 700-800 ºC. The carbonized products are discharged from the carbonization machine through water cooling, and the carbonization ignition is supplied by the pre heating wood powder burner (or gasifier or natural gas burner). Carbonized Briquette Making Machin Advantages of two-layer continuous drum carbonization machine: 1. Material adaptability is strong. Biomass with water content less than 25% and particle size less than 30mm can be carbonized; 2. The carbon product has good quality and high carbonization rate. Carbon products can be used not only as fuel carbon, water smoke carbon but also as raw materials of metallurgical carbon and activated carbon; 3. The carbonization depth control ability is strong. The residue of volatile matter in carbon products is 10-25%, which can be controlled on demand; 4. The equipment is safe and has environmental protection, has stable operation and long service life. Select a large number of new materials and new processes, use patent technology design, precision production, after a large number of practical tests, every detail is pursuit of perfection, to ensure the quality of each set of equipment. Applica