Automatic Surface Area Size Analysis BET Surface Area Analyzer Porosimetry System Product Description CY-1010 CY-1020 CY-1030 1tested sample and 3 pretreated samples in the meantime 2tested sample and 3 pretreated samples in the meantime 3tested sample and 3 pretreated samples in the meantime Brief Introduction to the Instrument CY-1020 Surface Area And Porosimetry Analyzer accords with the international standards ISO9277, ISO 15901 and National standard Gb-119587. It tests desorption process in the principle of static capacity measurement tested through static gas balance and pressure tested. They are tested in the temperature of liquid nitrogen. The gas of known quantity is filled into the sample tube and the pressure is to fall, then the Moore's quality of adsorbed gas is calculated. With calculated balance adsorption quantity and theoretical model, the instrument evaluates the parameters such as single-point, multipoint BET specific surface area, Langmuir specific surface area of the samples; BJH mesoporous, macroporous area,area distribution; t-plot microporous and surface areas, Dubinin Astakhov microporous distribution, Hovath-Kawazoe microporous distribution; DFT and MC aperture distribution model. Guarantee for Trustworthy Tested Data Reasonable connection of pipes, capability of s vacuum pumping, precision and sensitivity of sensors, automation of the instrument and numbers of the digital models for the different samples. Modular Gas pipes Design Rise-1020 Surface Area And Porosimetry Analyzer accords with the most developed design ideas, designed with special modular stainless steel vacuum pipes . It is leak proof and pollution-free. It is high vacuum and avoids leakage due to excessive pipe connections. It is specially-designed research instrument for the micropores study, with diffusion pump to keep the system high vacuum. Constant temperature Dewar flasks is self-developed with special internal structure, store the liquid nitrogen for more than 10 days. The liquid nitrogen is almost free of losses during the test so that the temperature of the tested samples is constant and that the Dewar flasks are protected as they are fragile and unfavorable for movement. High-precision sensors Several high-precision sensors and 22-bit AD converters ensure the precision of the specific surface area and aperture. Developed theoretical model With DFT and MC aperture distribution models, it is developed in the world, and is the Number One of the specific surface area and Pore size distribution Analyzers in China Automatic operation Adsorption and desorption processes are automatically controlled by computers and free of manual operation. Technical characteristics 1, single-point, multipoint BET specific surface area 2, BJH specific surface area, area distribution, total area 3,t-plot micropores volume and surface areas, Dubinin Astakhov micropores size distribution, Hovath-Kawazoe micropores size distribution 4, DFT and MC aperture distribution model Technical parameters and instrument configuration 1, Test principle: low-temperature nitrogen physical adsorption (static capacity) 2, specific surface area : 0.01 m 2 without upper limit 3, Analysis of range for pore size : 3.5-5000 angstrom 4, adsorbed gas: nitrogen 5, P/PO test range: 1 X 10 -6 - 0.998 6, pressure and temperature measurement: 4 imported absolute pressure sensors 0-133 Kpa( precision 0.12%) 1 temperature sensor PT-100( Precision 0.1) 7, Dewar flask: 2.0L, duration of 80 hours 8, vacuum pump: mechanical pump 9, Ultimate vacuum: 1.0 X 10 -4 Torr 10, Measurement software: adsorption /d