| Type: | Ph Electrode |
|---|---|
| Cooling System: | Radiator |
| Function: | Over Voltage Protection |
| Materials: | Antimony and Glass Ball |
| Transport Package: | PP Bag, Paper Box. Sponge, Seaworthy Box. |
| Trademark: | BOQU |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| 1.It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, difficult to block and |
| easy to maintain. |
| 2.Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh |
| environment. |
| 3.There is no need for additional dielectric and there is a little amount of maintenance. |
| 4. High accuracy, fast response and good repeatability |
| Model No.: PH8011 | |
| Measuring range: 0~14PH | Temperature range: 0-85ºC |
| Compressive strength: 0.6MPa | Material: PPS/PC |
| Installation Size: Upper and Lower 3/4NPT Pipe Thread | |
| Connection: Low-noise cable goes out directly. | |
| The antimony is relatively sturdy and corrosion-resistant, which meets the requirements for solid electrodes, | |
| corrosion resistance and the measurement of the water body containing hydrofluoric acid, such as the | |
| wastewater treatment in semiconductors and iron and steel industries. The antimony-sensitive film is used for | |
| the industries corrosive to the glass. But there are also limitations. If the measured ingredients are replaced by | |
| antimony or react with antimony to produce complex ions, they should not be used. | |
| Note: Keep the antimony electrode surface cleaning; if necessary, use the fine | |
| Sandpaper to polish the surface of antimony. | |
| Model No.: PH8012 |
| Measuring range: 0-14pH |
| Temperature range:0-60ºC |
| Compressive strength:0.6MPa |
| Slope: ≥96% |
| Zero point potential: E0=7PH±0.3 |
| Internal impedance: 150-250 MΩ (25ºC) |
| Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) |
| Installation size: Upper and Lower 3/4NPT Pipe Thread |
| Connection: Low-noise cable goes out directly. |
| Application: Applicable to various industrial sewages, environmental protection and water treatment. |
| It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy |
| maintenance. |
| Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment |
| It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is |
| no need of the jacket, thus saving the installation cost. |
| The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20 |
| meters free of interference. |
| There is no need for additional dielectric and there is a little amount of maintenance. |
| High measurement accuracy, fast responsing and good repeatability. |
| Reference electrode with silver ions Ag/AgCL |
| Proper operation shall make service life longer. |
| It can be installed in the reaction tank or pipe laterally or vertically. |
| The electrode can be replaced by a similar electrode made by any other country. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}