YX51-248/298/450 COLD ROLLING MILLS
Material:
0.5-0.6 mm Thickness, 0.6mm is for inspection.
0.7-1.2 mm Thickness, 0.8mm is for inspection.
Ex cold rolled coil, Galvanized Coil, Yield strength: 550Mpa
Machine Components
a.5Ton*650mm Simple Uncoiler Rack
Un-powered, Load capacity = Max.5Tons
Coil Inner-diameter= 470-510mm, Coil width = Max.650mm
b.Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving; 18-step to form, another 3 separate steps to form the ribs
Rollers manufactured from 45# steel, CNC lathes, heat treatment, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
The Tooling is configured using pre-machined Spacers, which are designed to allow for different width of panel to be formed
Main motor =11KW, Frequency speed control
Max line speed of roller former: Approx.15m/min;
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
c.Hydraulic Cutting Device
Stop to cut, Post cut, Slug breaker
Pump motor =7.5KW
Total three sets of cutting blades
Cutting tool material: Cr12, Heat treatment;
d.PLC Control System
Control the quantity & cutting length automatically.
Combined with: PLC, Touch Screen(Siemens), Inverter (Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control voltage 24V
Product rack Un-powered, 6 meters long
Electric seaming machine, one complete set, including two units (two steps)
For 0.5-0.6 mm thickness material only
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free.
The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before
the machine be send out of factory.
Audited Supplier 
){kind=link}
){kind=link}