This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
General Parameter
1 |
Item |
Parameters |
2 |
Model NO. |
YX323-969 |
3 |
Material |
Pre-painted galvanized sheet |
4 |
Thickness |
0.4-0.7 mm |
5 |
Yield Strength |
350 MPa |
6 |
Feed Width |
1200 mm |
7 |
Effective width |
969 mm |
8 |
Roll Stages |
26 Stages |
9 |
Shafts Diameter |
ф75/95 mm |
10 |
Main Motor Power |
11 KW |
11 |
Hydraulic Group Power |
5.5 KW |
13 |
Electric Standard |
According to local voltage |
Machine Components
A. 5 Ton X 1250 Hydraulic Un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Load capacity = Max.5Tons
Coil Inner-diameter= 510±30 mm, Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/start rotation
B. Hydraulic Pre-shearing device, manual control
Hydraulic Pre-shearing device, manual control
Share in the same hydraulic group with post cutting device
Only for cutting the first piece and the end piece of the sheet
One extra stage with rubber shaft required in front of the pre-shearing device for assistance to feed in the sheet
C. Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;26 stages to form
Wall-plate-frame Design
Rollers manufactured from 40Cr,CNC lathes,hard chrome coating
Shafts Diameter=ф75/95mm, Precision Machined
Main motor =11KW, close loop control
D. Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Cutting tool material : Cr12, Heat treatment;
Pump motor =5.5KW
E. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen, Inverter (SIEMENS), Encoder (Omron), REMOTE CONTROL etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
F. Product Rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.