Xk7126 High Speed 3 Axis CNC Mill Small Machining Product Name: CNC Milling MachineIntroduction The machine tool is a CNC milling machine with strong load-bearing capacity. The three-direction guideways are hardened rails. The guideways are wide and spanned. The structure and shape dimensions are compact and reasonable. The spindle is driven by frequency conversion or servo motor through synchronous belt. It can be used for milling, drilling, reaming and reaming. It can process complex and high-precision parts such as plates, plates, shells, dies and so on. It is suitable for many kinds of medium and small parts, such as plane, inclined plane, groove, hole and so on. It is also used in machinery, electronics, instruments, moulds, automobile and other industries. The ideal processing equipment.
Features1. The main components of the base, pillar, worktable, middle sliding seat, lifting sliding seat and so on are cast with high strength materials, and are treated by artificial aging to ensure the long-term stability of the machine tool, which provides a guarantee for the stability of the machine tool performance.
2. High-speed, high-precision and high-rigidity spindle with strong bearing capacity.
3. The X-direction and Y-Z guide rails of the worktable are sliding guideways, which are quenched by supersonic frequency and grinded precisely. The sliding guide surface is precisely scraped and lapped, and the composite PTFE material is coated with automatic forced lubrication, which reduces the friction resistance of feed motion, reduces the low-speed crawling and improves the precision life of machine tools.
4. X, Y and Z three-way feeding adopts high precision and high strength ball screw, driven by servo motor, to ensure the positioning accuracy of machine tools.
5. Protective devices are used for guide rails and ball screw to ensure the cleanliness of lead screw and guide rails and the transmission and operation accuracy of machine tools.
6. Z direction is to enlarge the brake-holding servo motor to ensure the smooth and smooth lifting motion of the spindle.
7. The electric lubrication device can force the longitudinal, horizontal and vertical screw and guide rail to lubricate, reduce the wear of the machine tool, and ensure the efficient operation of the machine tool. At the same time, the cooling system can change the flow rate of coolant by adjusting the nozzle to meet different processing needs.
8. The machine tool operating system is suspended on the upper right of the machine tool through the arm, which conforms to the principle of ergonomics. The operating box can rotate at a certain angle, and the operation is convenient and reliable.
Specifications | Content | Unit | Parameter |
Stroke | Left and right Stroke(X) | mm | 600(could be 1M) |
| Front and back Stroke(Y) | mm | 360 |
| Up and Down Stroke(Z) | mm | 450 |
| Spindle head end to working table | mm | 70-520 |
Workbench | Workbench length | mm | 800 |
| Working table width | mm | 260/300 |
| Workbench load-bearing | Kg | 350 |
T-groove | Specification | mm | 3-16 |
| Centre distance | mm | 80 |
Spindle | taper | | BT40 |
| Distance from spindle center to guide rail surface | mm | 380 |
| Spindle speed | rpm | 6000(or 8000) |
| Maximum rated power | Kw | 3.7 |
| driving system | | Synchronization band |
Percision | positioning accuracy | mm | ±0.015 |
| Repetitive accuracy | mm | ±0.008 |
Axial motor | Power X/Y/Z | N | 6/6/10(10 with brake) |
Feed Speed | X/Y/ZMax speed | m/min | 12/12/10 |
| X/Y/ZMax cutting speed | mm/min | 1/5000 |
Sotrehouse | Model | | DouZhu BT40 |
| Volume | set | 12/16/20 |
| Air Pressure Request | kg | 6 |
General | Weight | kg | 2350 |
| Dimension | mm | 2200x1800x2250 |
| Power Request | KVA | 380V |
Power Supply Device3 phase 380V±10% 50Hz±10%
Electricity capacity 8KVA
Cooling systemTank Volume 44L
Cooling Pump Power 90W
Cooling pump flow rate 12 L/min
Size and WeightDimension(length * width * height) 2200×1800×2250mm
Weight 2350Kg
Random Accessories of Machine Tools
1) Spring chuck handle BT40 (select BT40 handle and pull nail) 1 set.
2) Card Spring 4, 5, 6, 8, 10 each 1
3) Adjustment of Cushion Iron _ 125 6
Standard Configuration6000 spindle |
3KwFrequency conversion motor |
Domestic Ball Screw |
Semi-protection |
Installation Conditionsa. Temperature
Operating Temperature: Normal Temperature 20 + 20 C
Storage and handling: - 30 ~50 C
Maximum change ratio: within 10 C/h
b. Humidity
Continuous: 70% or less (no condensation) for a short time: 95% or less (no condensation)
c. Installation Site Conditions
1. Not affected by external vibration
2. Not affected by corrosive gases
3. Avoid direct sunlight machine tools
4. Avoid direct contact with external wind, air and cold and hot air for temperature adjustment.
5. Avoid installing heating and other heat sources near machine tools
6. Reduce dust (avoid casting, welding, sheet metal workshop, etc.)
7. Avoid leaking and soaking
d, power supply: 3-phase 380V + 10%; 50Hz + 1Hz
Installation, Acceptance and Training1. Installation and commissioning shall be carried out from the commissioning personnel of our company to the factory where the buyer is located.
2. The buyer shall notify the seller of the installation and commissioning of the equipment within 10 days after the arrival of the equipment.
3. After the equipment arrives at the factory, the buyer shall be responsible for:
A. Choose the installation location of machine tools, lay a good foundation and put the equipment in place.
B. Operators learn the technical data of machine tools in advance
C. Workpieces, Tools and Fixtures for Ready Processing
4. Seller's personnel shall carry special tools for installation and commissioning, and other tools and pick-ups shall be provided by Buyer.
5. Acceptance
A. Inspection of main machine tool accessories
B. Inspection of equipment operation
C. Acceptance and acceptance of machine tool accuracy, our company provides factory accuracy checklist for acceptance and acceptance, the buyer is responsible for the required checking tools and measuring tools.
TrainingA. If the buyer needs to train in the factory, he can send the learners to study in our company, or he can send the debuggers from our company to the factory where the buyer is located for the training of machine tool operation and maintenance at the same time of installation and debugging.
B. The buyer's programming training personnel should have a certain cultural foundation of technical personnel, participate in operation and maintenance training personnel and have a certain level of common machine tool operation skills.
9,Warranty period and after-sales service
1. Warranty Period: The machine tool's warranty period is 12 months from the date of equipment leaving the factory.
During the warranty period, the company is responsible for free maintenance of machine tools due to product quality problems.
Subordinate conditions are within the warranty period, but not applicable. Users must pay all maintenance costs.
A. When machine tools are damaged by earthquakes, typhoons, floods or disasters beyond human resistance.
B. Failure, rust or damage caused by improper operation and maintenance of the buyer.
After the warranty period, the seller is responsible for guaranteeing the compensated supply of spare parts, technical consultation for maintenance and repairs to the compensated person. The seller charges the fee for replacing the faulty parts at a preferential price and provides spare parts.
2. After-sales service
If the machine tool fails, the company's after-sales service personnel will arrive at the user's site within 48 hours (24 hours in our province) to troubleshoot the machine tool. After completion, the user fills in the "feedback sheet" of quality problems, and fails to repair the same part three times. The seller shall unconditionally replace the new part for the buyer.
Description: Due to the different configuration, special order, CNC system and the continuous improvement of products, some technical parameters will be affected. Please check the actual situation when ordering. Understanding the inconvenience.
Contact US