Basic Info.
Suitable for
Recycled Material, Wood, Paper
Paper Thickness
Normal Specification Paper
Economic Speed
80-120m/Min
Corrugated Paper
100-150G/M2
Equipment Covers
About52m*10m*5m
Transport Package
Plastic
Specification
WJ150-1800-I
Product Description
main technical parameters and requirements in production linetype:WJ150-1800-I type three layer corrugated paperboard production line:1.The maximum production width of the corrugated cardboard:1800mm2.Design speed:150m/min3.Economic speed:80-120m/min note:Production line speed test paper should meet the following requirements:(the surface temperature of the equipment is not less than 172ºC) Paper rating of not less than B grade Paper moisture content of about:11%±2% top paper:100-250g/m2 core paper:100--250g/m2 corrugated paper:100-150g/m24..Flute-type combination:A ,C, B, E(as customers' requirement)5.Steam the necessary requirements: amount of steam 1500-2000Kg/Hr the highest pressure:1.2Mpa common pressure:0.8-1.1Mpa6,power supply:380V 50Hz Three-phase four-wire system7,equipment installed total power:about150KW The actual power consumption:about 80KW(full speed)8,equipment covers:about52m×10m×5m(Specific length of foundation Figure prevail)9,Equipment out of paper orientation:According to the user to determine the transmission plant set left or right position10,Equipment applicability,Available in A, B, C class domestic or imported paper PaperCustomer-owned section1,steam heating system:proposal with 2000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.2,air compressed machine,air pipeline,glue conveying pipe.3,power supply,wires connected to the operation panel and line pipe.4,water sources,water pipelines,buckets and so on.5,Water, electricity, gas flush mounting civil foundation.6,Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material.7,Oil equipment,lubricating oil,hydraulic oil,lubricating grease.8,installation,commissioning of food, accommodation.And provide installers with the installation.ZJ-V5B hydraulic shaftless mill roll standstructural feature: ★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.★brake adjustable adopts multipoint braking system.★every stand matched two sets paper car , and they can paper on the both sides at the same time.
technical parameters:1,the range of clamping paper:MAX1800mm MIN1000mm 2,clamping diameters:MAX¢1500mm MIN¢350mm3,main shaft diameter of paper holder:¢240mm 4,gas source work pressure(Mpa):0.4---0.8Mpa5,equipment size:Lmx4.3*Wmx1.8*Hmx1.6 6,single weight:MAX4000KgHydraulic system parameters:- Work pressure(Mpa):16---18Mpa 2,lifting hydraulic cylinder:¢100×440mm
- Clamping hydraulic cylinder:¢63×1300m 4,hydraulic station motor power:3KW --380V -- 50Hz
5,solenoid valve voltage:220V 50 HzMainly purchased parts, raw materials and origin:Name of main parts | Brands or place of origin | material |
Main shaft | Day steel production | diameter242mm |
Swing arm | Production by own | Resin sand gray ironHT200 |
wallboard | Jigang prduction | Q235AWelding parts |
bearing | HRB,ZWZ,LYC | |
expand chuck | Zhejiang xusheng | 3,4inch shared |
Main electrical appliance | France Schneider | |
button | CHINT NP2series | |
Air switch | French Schneider | |
Pneumatic components | Zhejiang Sonor CSM | |
Hydraulic station | Shandong zaozhuang | |
Brake pump | zhejiang | |
structural feature:★the whole track buried,The main frame of the 14th Channel steel with ¢ 20mm cold drawn welded round,length of track6000mm.★each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.Mainly purchased parts, raw materials and origin:Name of main parts | Brands or place of origin | material |
track and paper car | Tanggang or jigang | NO14channel steel,Q235A,steel strip |
bearing | HRB,ZWZ,LYC | |
RG-1-900 top(core)paper preheaterstructural features:★preheat roller accord the pressure container national standards,and enclose the pressure container certificates and inspection certificate.★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.★electromotion adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°technical parameters:- Effective width:1800mm 2,diameter of preheat roller:¢900mm
3,angle adjustment range:360°rotation 4,angle shaft diameter:¢110mm×25,steam temperature:150-180ºC 6,steam pressure:0.8-1.3Mpa7,equipment size:Lmx3.3*Wmx1.1*Hmx1.3 8,single weight:MAX2000Kg9,working power:380V 50Hz 10,Motor power:250W short(S2)working systemMainly purchased parts, raw materials and origin:Name of main parts | Brands or place of origin | material |
Steam rotation joint | Quanzhou yujie | |
preheater | Hangang or jigang | Q235Bpressure containerboard |
bearing | HRB,ZWZ,LYC | |
Seat belt bearing | Zhejiang wuhuan | |
Reducer | Shandong dezhou | |
contacts | Schneider | |
Angle axis | | GB seamless steel pipe¢110 |
traps | beijing | Inverted bucket |
SF-320C fingerless type single facerstructural feature:★adopt hood suction structure,matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed.★High quality resin sand casting,wall thickness 200mm.Adopt independent gear box, Universal joint transmission structure.★install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick.★Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency.★The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry.★Automatic circulation system for glue, two-cylinder pneumatic gluing device, with good cushioning effect.★Glue department using integrated slide structure,Glue roller surface after grinding engraved with 25 lines and pit-style textured hard chrome plating.★corrugated roller adopt tungsten carbide dealing,diameter of the main corrugated roller¢ 320mm,Quenched→rough car→bore fine boring→shaft head shrunk-on→welding → tempering to stress→fine cars→coarse grinding→IF quenching→CNC grinding machine grinding→tungsten carbide dealing,hardness of surface is HV58degrees.★Active force variable frequency motor drive, energy efficient, low failure rate.★Glue wide electric adjust to changes in the width of the paper used.★Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy.★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery.technical parameters:- effective width:1800mm 2,operate direction:left or right(Determined in accordance with the customer's facility)
3,design speed:150m/min 4,range of temperature:160-180ºC5,air source:0.4-0.9Mpa 6,steam pressure:0.8-1.3Mpa7equipment:Lmx3.5*Wmx1.7*Hmx2.2 Roller diameter parameters:1,corrugated roller:up¢313mm down¢316mm pressure roller:¢320mm 2 ,glue roller:¢240mm fixed paste roller: ¢140mm preheat roller:¢402mmpowered motor parameters:- main frequency drive motor:18.5KW rated voltage:380V 50Hz Continuous (S1) working standard
2,suction motor:11KW rated voltage:380V 50Hz Continuous (S1) working standard3,glue reducer:100W rated voltage:380V 50Hz Continuous (S2) working standard4,glue adjusting motor:100W*2 rated voltage:380V 50Hz short(S2) working standard5,glue pump motor:2.2KW rated voltage:380V 50Hz Continuous (S1)working standardAuxiliary equipment:1,Special pulley crane configuration tile roll maintenance, convenient to use when maintenance tile roll, and fast.2,Configuring an external guide pulley crane to lengthen the trip, in order to successfully remove the line outside the repair parts.Mainly purchased parts, raw materials and origin:Name of main parts | Brands or place of origin | material |
wallboard | Production by own | HT250 |
Transmission box | hebei | QT450 |
Corrugated roller | | Alloy steel corrugated |
Rotation joint and Metal Hose | Fujian quanzhou yujie | |
Main frequency motor | Hebei hengshui yongshun motor factory | |
Reducer motor | Taiwan chengbang | |
Bearings | HRB,ZWZ,LYC | |
Corrugated roller and pressure roller bearing | America Timken | |
Seat belt bearing | Zhejiang wuhuan | |
High pressure fans | Shanghai yingfa motor factory | |
cylinder | Zhejiang sonor CSM | |
Solenoid valve | Zhejiang sonorCSM | |
traps | beijing | Inverted bucket type |
contactor | France schneider | |
button | Zhengtai NP2 series | |
Air switch | French schneider | |
Position Sensor | JapanOMRON | |
Frequency controller | Taiwan delta | |
PLC | Taiwan delta | |
Human Machine Interface | Taiwan WEINVIEW or MCGS | |
Lose rubber pump | Hebei botou | |
TQ conveyor bridgestructural features:★This part is the main beam of the 20th channel, 16-beam, angle iron 63, column, etc. are connected.★Both sides of the security fence, ladder (with 8 small channel production), high-strength save people the word pedals, ensure the safety of personnel and easy to operate.★Pull the paper shaft surface tension axis, feeding shaft by grinding hard chrome plated.★Vacuum tension control, 5-inch suction tube, plus regulating valves, air flow can be infinitely adjustable.★Dual front bezel correction guide column positioning, screw driver, fast and accurate positioning, walking steadily.roller diameters parameters:1,Paper roll and a tension roller diameter:¢130mm diameter of conveyor roller:¢180mm2,Active tension roller diameter:¢85mm diameter of over paper rollers and guide rollers:¢111mm 3,Paper towing shaft diameter:¢110mm Motor and electrical parameters:1,corrugated single paper lift motor:2.2KW 380V 50Hz continuous(S1)work system2,The bridge adsorption motor:2.2KW 380V 50Hz continuous(S1)work system3,Wide motor tune cardboard: 250W 380V 50Hz short(S2)work systemmain purchased parts,materials and place of origin:Name of main parts | Brands or place of origin | material |
The bridge main skeleton | Tiangang or tanggang | NO20channel iron,NO18beam,NO12channel iron,NO63angle,60*80squal steel and so on connected. |
guardrail | tiangang | ¢42mmLow pressure fluid pipe |
Paper lifting belt | Shanghai | PVC conveyor |
Cardboard conveyor | Hebei | Parallel transport rubber band |
Adsorption inverter fan | Shanghai yingfa motor factory | |
inverter | Taiwan delta | |
bearing | HRB,ZWZ,LYC | |
Seat belt bearing | Zhejiang wuhuan | |
Paper width adjustment gear | Shangdong jinzhan reducer | |
Paper motor(frequency) | Hebei hengshui yongshun motor | |
Conveying rollers and the rollers, the paper roll | Tiangang Seamless steel pipe | |
contacts | Chint or de li xi | |
button | Chint NP2series | |
RG-2-900 double preheaterStructural features:★preheat roller accord with the national standard of the pressure vessal,and enclosed the pressure container certificate and inspection certificate.★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.★electric adjustable angle, it can rotated adjust the paper preheat area in the range of 360°.
technical parameters:1,diameter of preheat roller:¢900mm diameter of wrap angle axis:¢110mm 2,motor power:250W short(S2)working system 380V 50HzMainly purchased parts, raw materials and origin:Name of main parts | Brands or place of origin | material |
Steam rotation joint | Fujian quanzhou yujie | |
preheater | | Q235B pressure container board |
bearing | HRB,ZWZ,LYC | |
Seat belt bearing | Zhejiang wuhuan bearing | |
RV reducer | Zhejiang fenghua | |
contacts | Chint or de li xi | |
button | Chint NP2 series | |
Air switch | France Schneider | |
Angle axis | | GB seamless steel pipe¢110 |
traps | Beijing | Inverted bucket |
SF-320C fingerless type single facerstructural feature:★adopt hood suction structure,matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed.★High quality resin sand casting,wall thickness 200mm.Adopt independent gear box, Universal joint transmission structure.★install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick.★Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency.★The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry.★Automatic circulation system for glue, two-cylinder pneumatic gluing device, with good cushioning effect.★Glue department using integrated slide structure,Glue roller surface after grinding engraved with 25 lines and pit-style textured hard chrome plating.★corrugated roller adopt tungsten carbide dealing,diameter of the main corrugated roller¢ 320mm,Quenched→rough car→bore fine boring→shaft head shrunk-on→welding → tempering to stress→fine cars→coarse grinding→IF quenching→CNC grinding machine grinding→tungsten carbide dealing,hardness of surface is HV58degrees.★Active force variable frequency motor drive, energy efficient, low failure rate.★Glue wide electric adjust to changes in the width of the paper used.★Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy.★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery.technical parameters:- effective width:1800mm 2,operate direction:left or right(Determined in accordance with the customer's facility)
3,design speed:150m/min 4,range of temperature:160-180ºC5,air source:0.4-0.9Mpa 6,steam pressure:0.8-1.3Mpa7equipment:Lmx3.5*Wmx1.7*Hmx2.2 Roller diameter parameters:1,corrugated roller:up¢313mm down¢316mm pressure roller:¢320mm 2 ,glue roller:¢240mm fixed paste roller: ¢140mm preheat roller:¢402mmpowered motor parameters:- main frequency drive motor:18.5KW rated voltage:380V 50Hz Continuous (S1) working standard
2,suction motor:11KW rated voltage:380V 50Hz Continuous (S1) working standard3,glue reducer:100W rated voltage:380V 50Hz Continuous (S2) working standard4,glue adjusting motor:100W*2 rated voltage:380V 50Hz short(S2) working standard5,glue pump motor:2.2KW rated voltage:380V 50Hz Continuous (S1)working standardAuxiliary equipment:1,Special pulley crane configuration tile roll maintenance, convenient to use when maintenance tile roll, and fast.2,Configuring an external guide pulley crane to lengthen the trip, in order to successfully remove the line outside the repair parts.RG-2-900 double preheaterStructural features:★preheat roller accord with the national standard of the pressure vessal,and enclosed the pressure container certificate and inspection certificate.★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.★electric adjustable angle, it can rotated adjust the paper preheat area in the range of 360°.GM-20 glue machineStructural features:★after quenched of the glue roller surface,the hole machining, surface grinding and doing balancing engraved anilox pit type, coating evenly, less consumption of plastic★glue roller turns is controlled by the frequency motor,by inverter control ensures glue roller line speed synchronous machine with double machine,they can operate independently.★electric adjustment display the glue amount.Automatic cycle for glue, glue avoid sedimentation, viscosity stability.★Pneumatic structure platen gap by electric tuning.On the next floor are made independent variable frequency motor drive.★take the speed signal of the double facer,so as to synchronous operation with it. Man-machine interface display, easy operation★amount of glue automatic adjustment control,amount of glue automatic adjustment with the produce speed, in automatic mode, you can also get in manual tuning. technical parameters:1,temperature range of the preheater:160-200ºC 6,steam pressure:0.8-1.2Mpa 3.air source system:0.4-0.7MpaRoller diameter parameters:1,glue roller:¢269mm Fixed paste roller:¢140mm2,bottom preheat roller:¢402mm up preheat roller:¢374mm the paper roller:¢110mmPower motors and electrical parameters:1,glue roller initiative frequency motor:3KW 380V 50Hz Continuous (S1) working standard2,glue amount adjustment reducer: 250W 380V 50Hz short(S2)working system3,pressure roller gap adjustment motor: 250W 380V 50Hz short(S2)working system4,glue pump motor: 2.2KW 380V 50Hz Continuous (S1)working systemSM-F type double facerstructural feature:★Heating plate surface by grinding treatment,hot plate width600mm,a total of 14 pieces heating plate.Minister of cooling setting 4 m. Preheat board is made of container board, in accordance with the national standard of pressure container, enclosed the pressure container certificate and inspection certificate.★Hot plate with intensive gravitational roll structure.Pressure roller with lifting hydraulic structure★heat pipe of the heating board seven section of control temperature, temperature display.★up cotton belt with double cylinder S cotton belt tensioning device.★bottom cotton belt with s-shaped correction manually tensioning mechanism, structure simple and practical,under with manual fine-tuning.★Drive roller coated with attached wear-resistant rubber ,showed a herringbone structure,With a high, ensure smooth cardboard output.★Main drive motor for frequency conversion motor,low-speed torque,wide speed range ,reliable, and easy maintenance.★hot plate internal for partition isolation structure,s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam.
Address:
Development Zone, East of Dongguang County, Cangzhou, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
HRB-PACK GROUP Co., Ltd.
Since 1999. Located in the south of Beijing and north of Jinan, 3 factories in China for Corrugated cardboard production line, Flexo printer slotter die cutter machine, Flute laminator machine. We have independent export and import company, can export to clients directly.
We have more than 30, 000 sqm production plant, and 3, 000 sqm office building. More than 400 staffs, include sales team, after sales teams, production team, scientific research team...
We have after-sale office in China, Vietnam, India, Bangladesh, Italy…
With a large quantity of models and complete specifications, our products can meet the demand of different clients. With the spirit of keeping improving, we pursue perfection constantly. Our company actively carries out the overall quality managing work. Because of the beautiful and tasteful appearance, compact and careful technology, reasonable price and perfect after-sale service, our products have won the trust and praise from clients all over the country for many years.
Regarding vigorously developing the carton industry in China as our task, we′ll sincerely cooperate with clients and meet their demands with better quality products and perfect after-sale services.