Main material:
1\Bundy tube: DIA4.76, 6, 6.35, 8, &9.52, wall thickness 0.7.
2\Low carbon steel wire Dia 1.0-1.6.
3\Bracket: Steel plate(SPCC), thickness 0.6-1.5.
4\Steel plate: SPCC thickness 0.3-0.4.
Performance: 1\Surface with electrophoresis coating to prevent the corrosion.
2\Inner cleaness can meet the requirement of CFC&R134A cooling system.
3\Can satisfy different cooling capability requirements.
Packing: With plastic caps at both ends.
Standard cartons, each piece separated by packing papers
(For LCL load, also may choose wooden packing, wooden pallet packing, but cost will be higher than cartons)
We can produce according to the drawing or sample supplied by clients, also can help the clients design and produce different condensers.
Al-plate: finished products thickness: 1.1 2.0mm,
raw material Al plate thickness: 1.4 2.5mm |
Structure |
Double side rollbond evaporator,
single side rollbond evaporator,
part single side rollbond evaporator |
Key process |
Prepare the material, Cleaning, roughing surface, Printing, Riveting, Rolling, Annealing, Blow up, Punching, Folding and shaping, Capillary connecting, Assembly welding, Leakage Test, Cleaning and drying, Coating, Curing, Inspection, Packing |
Technical Standards |
1) Size: width 590 (max), length 2050 (max)
2) Can produce according to the drawing or sample supplied by clients, also can help the clients design and produce different models of roll bond evaporator. |
Performance |
1) Surface treated with powder painting to prevent the corrosion
2) Inner cleanness can meet the requirement of R134a & CFC cooling system.
3) Can satisfy the cooling capability requirements. |
Capacity |
3.5 million sets per year (10000 sets per day) |
|
R134a Cooling System Tube Inside standards |
Residual moisture |
≤5 /100cm3 |
Residual impurity |
≤1 /100cm3 |
Residual mineral oil |
≤100 /100cm3 |
Residual chlorine |
≤5vloppm |
Residual paraffin |
≤3 / |
Biggest single impurity |
≤0.5mm |
|