| After-sales Service: | Available |
|---|---|
| Warranty: | 5 Years |
| Material: | Nylon |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | 2.0%~5.0% |
| Tensile Strength: | 30~40MPa |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Wholesale MG Nylon Sheet for Anti-corrosion Equipment Application
Abosn is the leading company for Engineer Plastic Alloy Material in China, We can produce the MG proeducts as per customer demands, the size can be choosed based on your requirements.
MG series engineering plastics alloy materials are chemically combined homogeneous polymers based on the copolymerization of different monomers with ultra-high polymers, using synthetic rare earth metal compounds and a variety of modified additives through special synthesis processes. They are different from ordinary engineering plastics in terms of internal properties of materials.
Abosn's engineering plastic alloy product has the characteristics of low friction coefficient, self lubrication, maintenance free, wear resistance, large bearing capacity, corrosion resistance, anti-aging and so on. Under the three state (dry state, water state and oil state), the friction coefficient changes little, and the static and dynamic friction coefficient of each state is small. Under the action of three fields (force field, electric field and chemical field), the mechanical performance is stable and the service life is long
Plastic alloy MGE sliding block has the characteristics of small friction coefficient, similar dynamic and static friction coefficient, large bearing capacity, wear resistance, seawater corrosion resistance, simple mechanical structure, stable operation, safety and reliability.
| item | Unit | UH-MGA | UH-MGB | UH-MGC | UH-MGD | UH-MGE |
| Density | g/cm³ |
1.14-1.3 |
1.14-1.3 |
1.2-1.3 |
1.2-1.3 |
1.0-1.1 |
| Tensile Strength | Mpa | ≥60 | ≥70 | ≥50 | ≥40 | ≥30 |
| Compressive Strength | Mpa | ≥110 | ≥120 | ≥100 | ≥90 | ≥35 |
| Impact Strength | KJ/m² | ≥90 | ≥100 | ≥70 | ≥60 | ≥50 |
| Shore Hardness | D | 65-76 | 65-75 | 66-78 | 66-78 | 50-65 |
| Linear Expansion Coefficient | 1/°C | 6.7-8.2×10-5 |
7-8.5×10-5 |
6.5-8.1×10-5 |
6.5-8.1×10-5 |
8-11×10-5 |
| Water Absorption | % | ≤0.8 | ≤0.7 | ≤0.8 | ≤0.8 | ≤0.03 |
| Service Temperature | °C | -40~+110 |
-40~+110 |
-40~+110 |
-40~+95 |
-60~+80 |
| Aging Life | Year | >5 | >5 | >5 | >5 | >5 |
| Limit PV Value | Mpa·m/s |
6 | 7 | 5 | 5 | 3.6 |
| Friction Coefficient | Dry Condition | 0.060~0.075 |
0.050~0.070 |
0.070~0.10 |
0.080~0.120 |
0.045~0.065 |
| Water Lubrication | 0.045~0.060 |
0.030~0.050 |
0.060~0.090 |
0.065~0.10 |
0.022~0.040 |
|
| Oil Lubrication | 0.030~0.050 |
0.020~0.040 |
0.045~0.070 |
0.055~0.085 |
0.016~0.030 |
Specifications:
| Item No: | Product Characteric | Detail |
| 1 | Self lubrication; Free maintenance | The product has good self lubrication, especially under high load, which can avoid the hidden danger that the metal dual surface is easy to burn. The bearing can be used for a long time after the initial oil filling, but the dual metal shaft shall be provided with cleaning maintenance and anti-corrosion treatment measures |
| 2 | Low friction cofficient | The friction coefficient is less than that of non-ferrous metals and other non-metallic materials, and the difference between dynamic and static friction coefficients is small. It can directly replace rolling bearings under low-speed and heavy-duty conditions. |
| 3 | Wear Resistance | The specific wear rate is 10-7mg / nm, which is an order of magnitude higher than that of other wear-resistant non-metallic materials, and the service life is greatly improved. |
| 4 | Enviromental; Anti Corrossion | The material is environment-friendly and pollution-free, and can resist the corrosion of various media under the action of electric field, chemical field, force field and acid, alkali and salt. When immersed in acid, alkali and salt solution (concentration is 5% - 25%), the swelling and dissolution are less than 0.03% - 0.7%. |
| 5 | High mechanical strength; Good vibration absorption | It can bear both large stable load and impact load. When subjected to impact load, its elasticity and self recovery (forced high elastic state) can effectively protect the running parts and other mechanisms from mechanical damage, and the bearing itself will not be damaged. |
| 6 | Low Water Absorption | It hardly absorbs water compared with other non metals, and the change of water absorption volume is small. |
| 7 | High Limit PV Value | Due to its large bearing capacity, small friction coefficient and good temperature resistance, it has a high limit PV value, up to 7MPa m/s |
| 8 | Honeycomb Microporous Structure | The honeycomb microporous structure of the product is conducive to the formation of permanent oil film and water film, so that the lubricating film is not easy to disappear. The microporous structure has no effect on the mechanical properties of the product. |
| 9 | No Peeling | Compared with composite materials, rubber, plastic, bakelite and other materials, the product has strong shear resistance and will not produce peeling or chipping |
| 10 | Good Processability | It has both toughness and sufficient hardness, and can be processed by conventional machining methods. |
Application:
Plastic alloy plates are widely used in engineering and equipment, such as large prefabricated parts sliding, hull sliding, construction machinery telescopic components sliding support, container micro motion support pad and so on.
Q:Is the size fixed?
A:No.we can meet your needs according to your acquirement. That is to say, we accept to customize.
Q: What is your MOQ of this item?
A: 500 kilograms.
Q: Is it all right to make customer's own brand name?
A: That's all right to engrave your own brand name.
Q: What is your company's available production capacity?
A: Usually 9000 tonnes per year.
Q. Can you special order a product for me?
A. We are typically able to special order products for customers. OEM service .
We are really the manufacture you are looking for!
1.We have professional sales with rich experience of working to handle each order.
2.We undertand your concern and aim to give the best service.
3.We provide quick responses and fast turn-around times
After-sales service - ABOSN Product Quality is Guaranteed
1.We have Strict QC and make sure every step of processing is for specification compliance.
2.We track our goods from transportation to your sales in local market to help your successful business.
3.Manufactured in ISO 9001:2008 facility with over 20 years of manufacturing and fabricating experience.
If you break a pad under normal conditions, Abosn will replace it free of charge.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}