Water Saving Drip Irrigation System Drip Tape Drip Line PE PVC Pipe Extruder

NO.	Components
1	Dripper Sorting Collating Device
2	High-Speed Dripper Conveyor Device
3	Automatic Loading and Drying System
4	Hopper and Dryer Hopper
5	Single-Screw Servo Extruder and Temperature Control System
6	Vacuum Forming Device
7	Secondary Cooling Device
8	Traction Punching Device and Control System
9	Dual-Station Automatic Winding Device
10	Wheel Tension Collecting Device
11	Industrial Chiller
12	Water Storage Tank

Dripper Sorting Collating Device

Sorting Method	Automatic Sorting
Sorting Speed	2300 pcs/min
Sorting Collating Unit Diameter	1480mm
Sorting Collating Unit Drive Method	AC Variable Frequency Controller
Inner Motor	1.5 kw
External Motor	2.2kw

High-Speed Dripper Conveyor Device

Conveying mode	Compressed Air and Drive by Servo
Servo Motor (Panasonic)	750 w
Conveying Speed	3000 drippers/min
Applicable Dripper Size	23mm*6mm*2.1mm
Rotation Speed	300 rpm

Automatic Loading and Drying System

Material Automatic Vacuum Loading
Loading Capacity	300 kg/h
Motor Power	1.5 kw

Hopper and Dryer Hopper

Capacity	50 kg
Heating Power	5 kw
Blowing Power	0.18 kw

Single-Screw Servo Extruder and Temperature Control System

Screw Model	SJ-75/38
Diameter	85 mm
Length to Diameter Ratio	38:1
Servo motor (Inovance)	80 kw
Extruder Height	2.85m (Including Suction Device)
Extrusion Capacity	160 kg/h
Material	38CrMoAlA
Surface Treatment	Nitriding, Polishing

 

Barrel Material	38CrMoAlA
Inner Surface Treatment	Nitriding, Polishing
Heating Control Zones	5 Zones
Heating Method	Heating Rings with Copper Inside and Steel Outside
Heating Power	22 kw
Cooling System	Air cooling with Fans on the Barrel
Cooling Fan Power	120w × 4

 

Gearbox
Model	ZLYG225
Brand	Guomao
Gear Type	Helical Gear
Gear Material	20CrMnTi
Gear Surface Heat Treatment	Gear Surface Hardening
Roller Material	40 Cr
Lubrication System	Pressure Lubrication System

 

Screen Changer

Type 160

Vacuum Forming Device

Compression Servo Motor (Panasonic)	400 w
Vacuum Pump	2.2 kw
Water Pump	750 W * 2
Tank Material	Stainless Steel
Tank Length	4m
Center Height	1000mm
Automated Open-Close Vacuum Control System

Secondary Cooling Device

Length	4 m
Method	Immersion
Material	Stainless Steel

Traction Punching Device and Control System

Punching Type	4-Hole Punching
Punching Motor	Servo 750 w (Four Groups)
Maximum Punching Speed	>3200 Punches/min
Traction Device Servo Motor (Panasonic)	3 kw
Maximum Traction Speed	>450 meters/min

Wheel Tension Collecting Device

When operational at production speeds >420 meters/min, it can be normally operated by one person.
 

Dual-Station Automatic Winding Device

Servo Motor	3 kw
Drive and Motor (Panasonic)	750 kw
Maximum Winding Speed	>450 meters/min
Winding Method	Automatic
Roll Changing Method	Manual
Winding Length	≤ 2000m

Industrial Chiller

Capacity

20P

Water Storage Tank

Capacity

1 m³

 

Supplementary Details

Equipment Operating Environment (Indoor)
Power Supply	Three-phase 380V
Temperature	10-35°C
Humidity	Below 55% RH
Production Environment
Voltage	380-415V
Installation Voltage	380-415V
Cooling Water Temperature	16-20°C
Air Pressure	0.45 Mpa-0.8 Mpa
Raw Material	HDPE, LDPE
Size of the Production Line	30m*2m*2m

Installation Instruction

Sinoah is committed to providing comprehensive equipment installation support and services to our overseas customers. We include detailed manuals and offer readily available online video guidance to ensure customers can smoothly install and commission the equipment. For more complex technical challenges, our approach includes dispatching experienced technicians directly to the overseas sites to provide professional guidance. This service ensures the correct installation and optimal performance of the equipment, although it requires customers to bear the related costs. Through this approach, Sinoah ensures that every customer can receive immediate and effective support anywhere in the world, enhancing user experience and equipment reliability.
 

 

Diameter	Wall Thickness	Spacing	Production Speed	Single Roll Length
16mm	0.15-0.2mm	300mm	300 m/min (Aiming 350 m/min)	1000-2000m
16mm	0.15-0.2mm	200mm	300 m/min (Aiming 350 m/min)	1000-2000m
16mm	0.15-0.2mm	150mm	300 m/min (Aiming 350 m/min)	1000-2000m
16mm	0.15-0.2mm	100mm	230m/min	1000-2000m
Diagram		Application Scenario
Customized		Farmland: soybeans, cotton, wheat, corn, etc. Vegetable Plot: potatoes, green leafy vegetables, tomatoes, cucumbers, etc.

Sinoah consistently adopts high-standard protective measures for packaging and transporting equipment, ensuring that each product safely reaches our customers. Our products are first cushioned with pearl cotton, then sealed with PVC film, and finally wrapped with tape bearing the company's logo, enhancing recognition and providing additional protection. All products are loaded on sturdy wooden pallets to ensure stability and safety during transit. Depending on the distance to various countries and regions, we select the most suitable mode of transportation and rely on our extensive network of freight agents. These reliable supports, accumulated over years in the industry, ensure efficient and safe transportation.

Sinoah (Tianjin) Agricultural Machinery Co., Ltd., a subsidiary of the group, is a professional enterprise engaged in the production and export of drip irrigation tape production equipment, drip irrigation pipes, dripper molds, and other drip irrigation accessories. Equipped with advanced production facilities and exquisite processing technology, we are committed to providing customers with high-quality and reliable products. As the first domestic company to introduce drip irrigation technology, we have obtained numerous research and development and invention patents through continuous technological innovation and R&D capabilities.
Our drip irrigation tape production equipment is renowned for its stable production performance, fast production speed, and low failure rate, and has received widespread acclaim in the market. Our products have been sold to over 60 countries and regions worldwide, and we have established long-term stable cooperative relationships with many internationally renowned enterprises. We fully recognize the value of water resources and the needs of crops, which is why we have adopted the mission of "Save Every Drop, Nourish Every Crop" We are committed to maximizing the utilization of water resources and optimizing crop production through efficient drip irrigation technology. This not only helps to improve the economic efficiency of agricultural production but also is a responsible approach to the environment and promotes the development of sustainable agriculture.
 

Q: Are you a factory or trade company?
A: We are an Integration of industry and trade. We have our own factory. Our factory specializes in producing all kinds of plastic extrusion machines, with a history of almost 20 years. We have the most advanced production technology and rich production experience, we hope we can have a good cooperation with you. We are still continuing to do development on the machine and always try to rise its technology level. more details information please contact with our company for further discussion.
Q: I want to have a cheaper price, how can I get it?
A: Our products can be customized, and the price is negotiable. If you want to have a cheaper price, please contact the sales person to discuss the details of the technical configuration, and they will provide you the most favorable price.
Q: Can I have a catalog of your products?
A: Yes, please contact the sales person or click our official website  to get the catalog.
Q: What is the procedure when you buy our machine?
A: Confirm the technology and machine configuration -----confirm price----sign contract and make PI---send down payment - start to make machine---inform you before machine finish-you come to our factory to check the machine---you accept the machine ----finish payment-exporting---send our technicians to your factory install the machine---answer your question all the using time and supply spare parts with cost only.
Q: Do you have a technical engineer come to our factory and install the machine?
A: Yes. Before shipping the machine, we have a machine-test and we will send the test video to our buyer. After that, we will send our engineer to buyer's factory to install and test the machines. Meanwhile, we will teach workers about the machine operation and maintenance.
Q: If I buy your machines, can I get any other services?
A: Yes. If the customer buy our machine, we will provide 1 year machine guarantee and wear-out spare parts for free. What's more, our sales staff and technician will offer online service 24 hours a day to solve your problems.
Q: I want to have a cheaper price, how can I get it?
A: Our machine can be customized, and the price is negotiable. If you want to have a cheaper price, please contact the sales person to discuss the details of the machine configuration, and they will provide you the most favorable price.
Q:How to order?
A: Please send us your purchase order by Email or you can ask us to send you a proforma invoice for your order. We need to know the following information for your order.
1) Product information: quantity, specification including size, material, technological and packing requirements and so on.
   2) Delivery time required.
3) Shipping information-company name, street address, phone & fax number, destination sea port.
Q: Where is your company located? How can I visit there?
A: Our factory is located in Tianjin. Welcome to visit us.
Q: What's your MOQ?
A: We will accept your order above 2, 000, 000 meters, and samples can be sent to you for testing.
Q: What kind of package for your products?
A: Carton, or based on your requirements.
Q:Whether my own customized products can be made?
A: Sure, we are glad to receive your customized order. Such as print your logo on the products or package will be well accepted. Your Logo can be put on your products by hot stamping, printing, embossing, UV coating, silk-screen printing or sticker.
Q: Can you supply product inspection certificate?
A: We can supply the certification for you, if needed.
Q: Can you delivery the goods to us by sea, by air, or by air express?
A: Of course, we can. But will not suggest shipping by sea, if the volume less than 1CBM.
Q: How long is your delivery time?
A: Generally it will take 15-20 days after 30% deposit been received
Q: What's your payment term?
A: 100% TT, or decided after negotiation between both parties.
Q: How to solve the quality problem after received the goods?
A: Send the product photos to us by email, or send a sample of it to us by express. Once the problem has been confirmed, we will give you a satisfied solution.