| Type: | Wireless |
|---|---|
| Network Site: | Intermediate Node Routers |
| Transfer Rate: | 10/100/1000Mbps |
| Firewall: | Without Firewall |
| Ports: | ≤4 |
| Port Structure: | Modular |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Item | IAP1200 |
| Dimensions (mm) | 150 ×86 ×27 |
| Back panel port | Two 1000M Ethernet ports |
| Front panel port | Four 10/1000M ports,one 1000M passthrough ports |
| The anti-theft screw |
Lateral direction support an anti-theft screw, AP indoor coverage is safe and secure |
| PoE | 802.3af /802.3at |
| Local | Support 48V DC local power supply |
| USB port | 1 USB2.0 port |
| PSE | PSE (48V) supported in LAN4 Port |
| Transmitting power | 17dBm |
| Maximum power consumption | <6W |
| Antenna | 3dBi antenna |
| Working temperature | -5°C~50°C |
| Working temperature | 15% ~95% no condensing |
| Item | Feature | IAP1200 |
| WLAN | Product positioning | In-wall AP |
| Working frequency band | 2.4GHz and 5.8GHz | |
| Virtual AP (BSSID) | 32 | |
| Number of spatial streams | 2 | |
| Dynamic channel adjustment (DCA) | YES | |
| Transmit power control (TPC) | YES | |
| Blind area detection and repair | YES | |
| SSID hiding | YES | |
| RTS/CTS | YES | |
| RF environment scanning | YES | |
| Hybrid access | YES | |
| Restriction on the number of access users | YES | |
| Link integrity check | YES | |
| Prohibiting the access of terminals with weak signals | YES | |
| Intelligent control of terminals based on airtime fairness | YES | |
| 11n enhancements |
40 MHz bundling | YES |
| 300 Mbps (PHY) | YES | |
| Frame aggregation (A-MPDU) | YES | |
| Maximum likelihood demodulation (MLD) | YES | |
| Transmit beam forming (TxBF) | YES | |
| Maximum ratio combining (MRC) | YES | |
| Space-time block coding (STBC) | YES | |
| Low-density parity-check code (LDPC) | YES | |
| 11AC | 802.11AC protocol | YES |
| Cable | Wired port VLAN configuration | YES,each wired port can be configured VLAN |
| AC remote configuration | YES,including CLI and WEB modes | |
| Security | Encryption | YES 64/128WEP,TKIP,CCMP encryption |
| 802.11i | YES | |
| WAPI | YES | |
| MAC address authentication | YES | |
| LDAP authentication | YES | |
| PEAP authentication | YES | |
| WIDS/WIPS | YES | |
| Protection against DoS attacks | Anti-DoS for wireless management packets | |
| Forwarding security | Frame filtering, white list, static blacklist, and dynamic blacklist | |
| User isolation | AP L2 forwarding suppression Isolation between virtual APs (multiple SSIDs) |
|
| Periodic SSID enabling and disabling | YES | |
| Access control of free resources | YES | |
| Secure admission control of wireless terminals | Secure admission control of wireless terminals based on DCSM | |
| Wireless SAVI | YES | |
| ACL | Access control of various data packets such as MAC, IPv4, and IPv6 packets | |
| Secure access control of APs | Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC | |
| Forwarding | IP address setting | Static IP address configuration or dynamic DHCP address allocation |
| IPv6 forwarding | YES | |
| IPv6 portal | YES | |
| Local forwarding | YES | |
| Multicast | IGMP-SNOOPING | |
| Roaming | YES | |
| AP switching reference | Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc. | |
| WDS | YES | |
| QoS | WMM | YES |
| Priority mapping | Ethernet port 802.1P identification and marking Mapping from wireless priorities to wired priorities |
|
| QoS policy mapping | Mapping of different SSIDs/VLANs to different QoS policies Mapping of data streams that match with different packet fields to different QoS policies |
|
| L2-L4 packet filtering and flow classification | Yes: MAC, IPv4, and IPv6 packets | |
| Load balancing | Load balancing based on the number of users Load balancing based on user traffic Load balancing based on frequency bands |
|
| Bandwidth limit | Bandwidth limit based on APs Bandwidth limit based on SSIDs Bandwidth limit based on terminals Bandwidth limit based on specific data streams |
|
| Power saving mode | YES | |
| Automatic emergency mechanism of APs | YES | |
| Intelligent identification of terminals | YES | |
| Wireless network VAS | Abundant wireless network VASs; applications based on smart terminals; advertisement push based on site locations; personalized push of the portal | |
| Multicast enhancement | Multicast to unicast | |
| Management | Network management | Centralized management through an AC; both fit and fat modes |
| Maintenance mode | Both local and remote maintenance | |
| Log function | Local logs, Syslog, and log file export | |
| Alarm | YES | |
| Fault detection | YES | |
| Statistics | YES | |
| Switching between the fat and fit modes | An AP working in fit mode can switch to the fat mode through a wireless AC; An AP working in fat mode can switch to the fit mode through a local control port or Telnet. |
|
| Remote probe analysis | Yes | |
| Watchdog | Yes |
| Product model | Product description | Remarks |
| IAP1200 | 802.11AC dual band wireless indoor wall-mounted AP (support 2.4GHz &5.8GHz, the maximum bandwidth 1167Mbps, the built-in antenna; support 4 Gigabit wired ports; support Gigabit Passthrough , wired port; support dual gigabit uplink , support 802.3af, support PoE remote power supply and the local direct current power supply ) (the accessories have no local power adapter and POE power supply module) |
Mandatory |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}