Print This Page

Home Chemicals Plastic & Polymer Plastic Materials

Virgin Pet Granules IV 0.8 Chips Bottle Grade Pet Polyethylene Resin pictures & photos

Virgin Pet Granules IV 0.8 Chips Bottle Grade Pet Polyethylene Resin

Feature:	Biodegradable
CAS No.:	25038-59-9
Formula:	(C10h8o4)N
EINECS:	208-750-2
Material:	Polyethylene Terephthalate/PET
Usage:	General Plastics

Customization:	Available \| Customized Request

Contact Supplier

Contact Now

Inquiry Basket

Chongyuan (Xiamen) Fine Chemical Co., LTD.

Gold Member Since 2023

Suppliers with verified business licenses

Manufacturer/Factory

Product Description

Company Info.

Overview
Product Description
Applications
Product Parameters
Packaging & Shipping

Basic Info.

Model NO.

PET

Plastic Properties After Heated

Thermoplastic Plastics

Plastic Forming Method

Blow Molding

Color

White

Transport Package

Bag

Specification

25kg/bag; 1100KG/BAG

Trademark

Chongyuan

Origin

China

HS Code

3901200090

Production Capacity

20000ton/Year

Product Description

PET Resin

Basic Info
Product Name	PET	Color	Natural color
Place of Origin	China	Filler	-
Brand Name	WANKAI/JADE	Grade	Blow molding grade
Model Number	Various	Processing Method	Blow Molding
Feature	bottle grade

1. PET is mainly used for fibers, and a small amount is used for films and engineering plastics.
2. Another use of PET is blow molding products, which are used in various bottles, such as water bottles, carbonated beverage bottles, and oil bottles.

Virgin Pet Granules IV 0.8 Chips Bottle Grade Pet Polyethylene Resin

1. Good electrical insulation performance, less affected by temperature, but poor corona resistance.
2. Non-toxic, weather resistance, good stability against chemicals, low water absorption, resistant to weak acids and organic solvents, but not resistant to hot water soaking, not alkali resistant.
3. The glass transition temperature of PET resin is high, the crystallization speed is slow, the molding cycle is long, the molding cycle is long, the molding shrinkage rate is large, the dimensional stability is poor, the crystallized molding is brittle, and the heat resistance is low.
4. The heat distortion temperature and long-term use temperature are very high among thermoplastic general engineering plastics.
5. Because of the high heat resistance, the reinforced PET is immersed in a solder bath at 250°C for 10 seconds, and it hardly deforms and does not change color. It is especially suitable for the preparation of electronic and electrical parts for soldering.

I.V. (dl/g)	0.80 ±0.02
Melting Point (ºC)	≥243.00
Color Value L	≥83.00
Color Value B	-0.5
Content of Water(%)	≤0.4

1.Packing:

1100kg/bag, or per your requirement.18mt-20mt /20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.

During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.