| Capacity: | 9kg, 12kg, 18kg |
|---|---|
| Type: | Automatic |
| Fire Agent: | Dry Powder, Foam Water Mist |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier UN ECE R107 Certificated Construction Machine Fire Extinguishing System are most commonly used in mining vehicles, industrial equipment, such as truck, tractor, bus, vehicles, on-road equipment and off-road equipment. Because they are non-conductive, they can be utilized to not only quell fires in ordinary combustible materials, but also on flammable liquid fires that involve live electrical equipment.
Working Principle of detection tube fire system:
There is 3 temperature sensor installed in the engine room, temperature sensor feedback the the temperature to the control panel. The control panel can indicate the temperature at anytime. The control panel was installed in the driver room, driver can see the temperature at anytime.
Once the Temperature of engine room increase to 100ºC, the control panel will activate the fire alarm. Driver will stop and check the situation. If necessary, driver will push the manual button on the control panel to activate the system.
Once the temperature still increasing, and reach to 140ºC, the temperature sensor feedback the signal to control panel, the control panel will activate the solenoid Valve, the solenoid Valve open and discharge agent to extinguish fire.
Diagram of detection tube fire system:
Working Principle of electrical valve fire system:
Detection Tube ruptures to hole when temperature reach 140ºC, and release pressure through the hole.(Or pushing the manual button of detection tube,pressure releasing from themanual button.
The resulting drop in pressure causes the head valve to be activated. At the same time the fire arlar was activated. Valve was opened and agent was discharged through the discharge tubing to the nozzles.
Agent covering the area and suppressing the fire quickly and thoroughly.
This system is totally automatic and is totally independent of electricity.
Diagram of electrical valve fire system:
Features:
|
PRI-SAFETY UN ECE R107 Certification Construction Machine Fire Extinguishing System |
|
|
Brand Name |
PRI-SAFETY |
|
Capacity |
9kg, 18kg, 9L, 18L, 25L, 75L, 100L |
|
Agent |
Dry Powder, Foam Mist, Water |
|
Working Pressure |
14Bar |
|
Testing Pressure |
27Bar |
|
Cylinder Material |
St12 red painting, Stainless Steel Cylinder |
|
Certificate |
CE, UN ECE R107 Certification |
|
System Activated Temperature |
140ºC Or Customized Temperature |
| Model | PRI-DCP-09-12 PRI-FWM-18 |
1)Where can you use this UN ECE R107 Certificated Mining Machine Automatic fire suppression system?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}