Basic Info.
Frequency Characteristics
Low Frequency
Usage
Electroplating Rectifier Electromagnet Controller
Power Source
Linear Regulated Power Supply
Application Range
Industrial and Mining Enterprises
Product Description
Technical Specifications
Working power supply 220/380Vac ±15%, 50/60HZ
Main circuit working voltage 50~660Vac ±15%, 50/60HZ
Voltage adjustment range: 0 ~ 100%
Current adjustment range: 0 ~ 100%
Phase shift range 0~178°
Adjust output resolution 1/4000
Stability accuracy better than ±1%
Trigger current: ≥ 750mA
Trigger capacity ≤ 5000A one-way thyristor
PID dynamic response time: ≤ 50mS
Overshoot: ≤ 10%
Input signal: DC0-5V, DC0-10V, 0-10mA, 4-20mA, 10K potentiometer adjustment
Three-phase trigger imbalance ≤ 0.3°
Applicable load: Resistive, inductive, capacitive, transformer load and other loads
Alarm relay contact capacity: 250Vac/10A
Dielectric strength: 3500 VRMS
Ambient (working) temperature: -20°C~ 60°C
Working Relative humidity: ≤ 90% RH (no frost)
Indoor installation requirements no flammable, no explosive, no corrosive gas, no conductive dust, and vibration should be less than 0.5G
Dimensions: 240X160X50mm
Dimensions between install holes: 225X145mm
Weight: 1KG
Altitude should be under 3000m, otherwise need to reduce the capacity level.
ST35 meets the standard:
IEC60947-4-2: Low-voltage switchgear and controlgear. Part 4-2: Contactors and motor-starters. AC semiconductor motor
Controllers and starters.
GB14048.6-1998: Low-voltage switchgear and controlgear Part 4-2: Contactors and motor starters AC semiconductor motor controllers and starters.
GB3797-89: Electronic Control Equipment Part II - Electronic Control Equipment with Electronic Devices.
IEC61000-4: Electromagnetic compatibility, test and measurement technology.
IEC65: Safety of household and similar general purpose electronic and related equipment powered by grid power.
Features
1. Using 32-bit industrial high-speed microprocessor, LCD screen or touch menu in Chinese, fully automatic SMD
process manufacturing, stable and reliable performance.
2. With digital constant current, constant voltage function, current limiting and voltage limiting function, it can control the loads precisely, and has overcurrent and overvoltage abnormal protection function.
3. Complete fault detection and alarm function, real-time detection of load status, load current, control signal, feedback signal loss and other parameters.
4. Intelligent PID control solution, parameter opening, can be set to any physical quantity flexibly. Great dynamic characteristics, adapts to different loads.
5. Phase loss protection: When the main circuit power supply is out of phase, the alarm prompts, and the load stops in real time to stop output
6. Interface compatibility: support 0-5Vdc, 0-10Vdc, 0-10mA, 4-20mA and other automatic input signals, direct interface with various instruments and PLC, can be manually controlled by potentiometer.
7. Overload protection: After starting, it will judge whether the load is overloaded. When it continuous overload the settled protection time, it stops running and the alarm relay outputs;
8. Soft start: At startup, the output voltage will gradually increase from zero to 100% to eliminate the impact on the grid and itself during load operation. The parameter of the soft start time can be set.
9. Soft shutdown: When stopped, the output voltage will gradually decrease from 100% to zero to eliminate the impact on the grid and itself when the load stops. The parameter of the soft shutdown time can be set.
10. It has the function of automatic phase sequence identification, no phase sequence requirement for the power supply of the control board, no debugging, very convenient wiring;
11. Current loop (voltage loop) feedback input signal supports various analog input signals such as transformer, Hall current (voltage) sensor, 0-75mV shunt, 0-5V, etc.
12. Can be remote controlled by PLC or other equipment, with MODBUS field bus communication function, full isolated control by RS485 (optional);
13. It also has a running time query function to record the current running time and accumulate all the running times;
14. Adopts intrinsically safe design, the control board (regulator) is designed with the function of preventing thyristor trigger interface from burnout protection, and supports input and output multi-function expansion board;
15. The thyristor drive interface has double-row LED indicator, the green light indicates whether the trigger board is faulty, and the red light indicates whether the external control line is correct. The error position can be quickly checked;
16. All output ports and digital switch input interface are electronic isolated, it is with better anti-electromagnetic interference protection.
17. With 2 groups Thyristor output current sharing function, uses manual method regulation to achieve balance.
Address:
Room 3003, Building 5c, Logan Jiuzuan Business Center, Tenglong Road, Longhua District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Company Introduction:
Shenzhen SinePower Technology Co., Ltd. Is a manufacturer and technical company focused on intelligent power control technology in the field of new energy. We have been engaged in researching and developing and producing industrial control equipment and intelligent power supply control for many years, and have accumulated mature and rich thyristor converter control technology and IGBT inverter control technology.
Continue to lead the innovation of core control algorithms and software technology in the industry, and become the domestic excellent solution provider of variable frequency inverter control technology. In the course of development for many years, sinepower has always used innovation as the source of product application and R&D.
Existing products: Thyristor trigger board, charger control board, electromagnetic chuck control board, electric permanent magnet sucker controller, DC conversion power supply, UPS uninterruptible power supply, medium and high frequency inverter power supply, etc. The products are designed in strict accordance with safety standards. Obtained CE certification and patent certificate.