The spray tower is adjustable in height and spray volume to meet different test standards. It's easy to clean and resistant to high temperatures, corrosion, and clogging. Spray pressure is 83kpa according to the standard.
Salt spray corrosion tests specimen including automotive, electronics, batteries, coatings, aerospace and marine applications.
It is recommended to use alcohol water to disinfect and rinse the quartz glass nozzle regularly;
Spray pressure is 83kpa according to the standard;
High temperature resistance;
Convenient cleaning and maintenance.
The importance of nozzles for salt spray corrosion test chambers
The accuracy of the test values of the salt spray corrosion test chamber is affected by many factors. If one factor is incorrect, the test values will be incorrect. The accuracy of the numerical values is closely related to the overall manufacturing process and design of the box, but in addition to these, the nozzle will also affect the numerical results. What kind of impact will the nozzle of the salt spray corrosion test chamber have? What are the reasons for this?
The spray is ejected directly from the nozzle, so the spray emitted by nozzles of different qualities is also different. It can be said that the quality of the nozzle directly affects the success or failure of the test. Therefore, it is very important to choose a good nozzle first. A good nozzle has undergone strict control in terms of hole diameter, bending angle, etc.
With a good nozzle, it must be used correctly to achieve its effectiveness. You need to pay attention when installing. When installing, you should handle it with care and do not use excessive force to cause damage to the nozzle. In addition, do not set the pressure too high when spraying, because this will also cause damage to the nozzle.
After the nozzle is installed, the water used also needs to be paid attention to. Ordinary tap water will have impurities, and these impurities will clog the nozzles. Therefore, tap water cannot be used, but distilled or deionized water must be used. In addition to impurities in the water, water vapor and oil in the air can also cause clogging of the nozzle, so an oil-water separator needs to be installed to remove impurities such as water vapor and oil in the compressed air.
It can be seen that the nozzle has an important impact on the accuracy of the test values. In addition to the correct initial use, regular maintenance is also necessary. In this way, the salt spray corrosion test chamber can exert its due effect and achieve the purpose of the test.
Audited Supplier 
){kind=link}
){kind=link}