Spain Indiba 448K Tecar Therapy RF Monopolar CET RET Deep Heat Spain Indiba beauty machine for skin Tighten
The principle of RF Diathermy
1. The treatment site is placed between the plates of a capacitor and becomes the dielectric.
2. The RF energy is diffused through the part of the body locate between the plate electrodes.
3. The oscillating fields produce distortion of molecules, rotation of dipoles and vibration of ions
4. The movement of the molecules and ions generates heat within the tissues.
5. These actions have been shown to have positive clinical effect on enhancing blood flow.
The cap res machine is a non-invasive regeneration treatment that ensures obvious results from the first session. It uses cutting-edge medical technology and has greater therapeutic efficiency than any other treatment in the market today. uses high frequency currents to raise the internal temperature of human tissue and is particularly effective in treating the causes and effects of:
1.Promote blood circulation and improve metabolism and immunity
2.Regulate endocrine, improve sleep, relieve fatigue
3.Relieves and heals various parts of the body, such as cervical spondylosis, lumbar spondylosis, frozen shoulder, etc.
4.Facial lift, improve skin tone and slow down facial aging
5.Improve body size, reduce visceral excess fat, slimming and shaping
6.Restore normal five senses by relaxing muscles and cells
7.Helps with early recovery of ligament sprains, muscle strains, muscle damage, and exercise pain
8.Solve the symptoms of body cold, low basal metabolism, cold hands and feet, etc.
HYPERTHERMIA
The therapeutic effects of Hyperthermia on the human body have been well-known since the 19th Century. It is mainly being indicated for inflammatory process, usually accompanied with pain. Methods used made it very difficult to obtain deeply. Controlled and harmless thermal increases and some requires "invasive" techniques.
What is Therma-s
Therma-S is intended for therapeutic diathermy to produce deep heating without excessive temperature elevation of the skin surface and subcutaneous tissue. Therma-s plus is applied to any part of the human body without pain, muscular contraction or disagreeable sensation of any kind.
CAP Mode
Mainly for the skin and 3-5cm shallow tissue, the effect is firming and anti-aging, and help restore the elasticity of bloodvessels, rebuild the microcirculation system, provide more nutrients for fibroblasts, and strengthen collagen synthesis,Increase the flow of cellular reactive oxygen species to restore cells and rebuild the reticular layer.
RET Mode
Mainly for visceral fat, the effect is to deep repair, help dissolve and soften deep stubborn fat, and excrete fat through the circulation, thereby reducing the volume of fat cells, reducing the circumference and reducing weight. Clinical studies have shown that this instrument has excellent results for use on the face, eyes, neck, chest or body care.
|
Part no
|
rf3.0
|
|
Rated voltage
|
100v-240v
|
|
Frequency
|
50/60hz
|
|
RF frequency
|
448k
|
|
Power
|
300w
|
|
Screen
|
touch screen 5.6 Inch
|
|
working temperature environment
|
10C-30C
|
|
Function
|
wrinkle remover.skin tighten, slimming. pain release
|
|
Ret treatment heads
|
4 pcs
|
|
Cap RF heads
|
7 pcs
|
Real pictur
Customer feedback
Our Company Information
Started from Year 2009, Guangzhou Allfond Electronics Co.,Ltd is one of the most professional manufacturers making various kinds of top beauty and slimming equipment, including:
1) Cavitation RF vacuum machine
2) IPL (Intense Pulsed Light) Hair Removal machines
3) RF (Radio Frequency) Skin Rejuvenation Systems
4) No needle mesotherapy machine
5) LED Skin Rejuvenation beauty machines
6) Micro needle derma pen /derma roller
7) Diamond and crystal microdermabrasion Systems
8) Cryolipolysis cavitation rf machine
9) Teeth whitening machine
10) SPA capsules
11) Provide OEM ODM service
We insists on the ideal of "technology innovation, professional manufacturer, and sincerely service" and the operating principle "customer priority, and mutual benefits". Quality is the soul of our company.
Our Service
Return Policy & After sale service:
If you want to exchange the items received, you must contact us within 7 days of the receipt of your order. And you should pay the additional shipping fees incurred and the items returned should be kept in their original status.
FAQ
1.What are the differences between the capacitive and resistive methods in the RF System?
The capacitive method causes the temperature to increase more rapidly in the ep1dermis(superficial depth area)but it penetrates less energy internally than the resistive method. The internal benefit is directly related to the amount of energy absorbed by the body. Also, the resistive method uses 100% to the current
2.Which model of equipment provides the deepest treatment?
All models reach exactly the same depth, since all have a closed circuit from the Application elect Mode through the plate or return electrode, The main difference is that the total amount of power supplied and ,therefore, that absorbed by the body, is greater with a more powerful device and this applies even more to the resistive mode.
3.What temperature is achieved with the RF system?
Depending on the sensitivity of the area being treated ,the temperature in the epidermis can reach 44-45ºC,whether in capacitive or resistive mode, internally this will depend on the degree of blood circulation, the better it is,The lower the temperature will be and vice versa. For example" an increase in temperature is
achieved far more rapidly in an inflamed area than in that same area when not inflamed. The calculation can be made from the increase in temperature in one minute 1n one cubic cm of tissue. at a depth of 5 mm in health tissue and in the liver, the increase can be up to 4.2'C in resistive mode and in capacitive mode.
4.What size of electrode provides the greatest benefits with the resistive method in the RF system models?
If the resistance needs to be increased according to the graph. you should use the 60mm electrode, If it needs to be reduced, use e 90mm electrode
5.Does application in certain in certain areas hurt when using the resistive mode?
If so,why?
If it sometimes hurts, this is due to poor vascularisation in the affected area. The area does not have sufficient drainage capacity therefore creating pressure internally, This is what causes the discomfort, however it does not occur with the capacitive method as it is a more superficial treatment.
6.Why is it that when there is inflammation, the power supplied is very low, but the temperature rises very quickly?
Because as the circulation is adversely affected, the level of cooling is quite reduced and the power tolerated is also very low.
7.Why is it that if you gently touch someone being treated it can feel like you have received an electric shock?
Part of the energy(a very small amount, about 2 or 3 watts) absorbed by a body is transmitted to another body, and if the contact is brief, this small concentration of energy can cause discomfort, This problem is solved by simply making the contact firmer.
8.Can I be negatively affected by the radiation when giving the treatment?
Absolutely not, Firstly, the power transmitted is very low, and secondly considering that the effects of the type of current from our machines are very beneficial for the tissues, the effect is always beneficial. never negative.
9.Why do you heat the plate in RES mode and not in CAP mode?
Because the power supplied by the RES methods is much higher than in the CAP methods.
10.Why, when applied to the forehead, does the RES method cause contractions and the CAP not ?
The RES method does not penetrate the brain and the current is connected in the scalp, leading to over-circulation which results in the contractions. This does not represent a problem but the discomfort can be avoided by reducing the output power of the equipment. As the CAP method has the power to penetrate the skull, the effect described does not occur.
11.What can be done about the slight dizziness which occurs when treating the neck?
It should be stressed that this only occurs in people with hypotension and one solution is to recommend that they have a cup of coffee 10 minutes before the treatment.
12.Can any product be used to enhance a treatment?
Number when applying the treatment, the products recommended by US must be used, Afterwards, to take advantage of the casodilatation of the pores, any products considered appropriate may be used with a manual massage.
13.Why is there sometimes an apparent over-inflammation in the treatment area, especially in the joints?
This is due to poor drainage in the treated area and is not caused by inflammation, but an accumulation of blood. Treatment should not continue in the affected area, but all around the periphery, in order to create good drainage, for example, with a knee injury, the treatment should be applied to the calf and the thigh and not be continued on the knee itself. Instead, it can b gently massaged after the corresponding drainage has been carried out.
14.Can one take a shower after treatment with the RF system without losing some of the treatment's benefits?
The only recommendation is to try to regulate the temperature of the water so that it 1s warm or not excessively cold. It should be said that, if wished ,the water can be turned to cold for 15 to 20 seconds at the end of the shower without decreasing the benefit obtained from the treatment
15.Can external metals cause burns during treatment with the RF system?
Only pendants and chains can cause problems if close to the application electrode since they do not have firm contact with the skin, it is therefore recommendable to remove all metallic objects not in firm contact with the skin, In the case of watches , etc.,they are not a problem as long as they do not interfere with the treatment at a mechanical level
16.Can the resistive method be used on the hair?
No. As the resistive method has a direct action with no isolation, it would products sparks from the hair, which would be very unpleasant.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}