| Application: | Telecommunication |
|---|---|
| Voltage: | Low and Medium Voltage Cable |
| Current: | DC & AC |
| Samples: |
as described
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Due to the cable shielding, electric and magnetic fields external to the cable do not interfere with signals inside the cable. Having this characteristic makes coax highly suitable for transmitting electrical signals that are either intolerant of being interfered with by stronger external electrical signals or where external radiation of these signals with co-site signals.
Primarily, coaxial cables are used for the transmission of Radio Frequency energy where tight impedance and RFI/EMI control is required. This is particularly significant in 50- and 75-ohm RF and Microwave applications when signal loss and interference is detrimental to overall system performance. The common need in the Military/Aerospace market is for high performance cable assemblies that are electrically stable.
The following is a list of the most critical performance aspects when specifying a coaxial assembly.
Measured in dB (decibels); increases as frequency increases.
Voltage Standing Wave Ratio (VSWR)) is a ratio expressing how efficiently RF is transmitted from a source, through a transmission line and into a load. The ratio values increase with frequency.
Measured in Hz (Hertz); the completion of one cycle of energy in the form of a wave. RF and Microwave frequencies range from High Frequency (HF) 3-30 MHz, Ultra-High Frequency (UHF) .3-3GHz, Super High Frequency (SHF) 3-30GHz to Extremely High Frequency (EHF) 30-300GHz.
The measurement, in Ohms, of resistance to the flow of current.
An insulating material between the inner and outer a coaxial cable conductor that is a poor conductor of electricity. Includes materials ranging from air to PTFE (Polytetrafluorethylene) ETFE (Ethylenetetrafluoroethylene) and FEP (Fluorethylenepropylene).
Foil or braid used as a conducting shield. Coax is supplied with varying amounts of shielding and shielding effectiveness. The amount of shielding required is determined by several factors: conductor diameter, flexibility or bend radius, and the specified electrical requirements.
The minimum radius of a bend without impacting electrical performance; measured to the inside curve. Bending coax beyond specification can cause the dielectric to stretch and force the center conductor off center. This changes the dimensional relationship of the conductor and shield, causing a change in impedance, translating to higher Voltage Standing Wave Ratio (VSWR). Impacts can also be seen with increased insertion loss.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}