Sodium Dioctyl Sulfosuccinate/1,4-Dioctyl Sulfosuccinate/Rapid Penetrant T/Penetrant T/Sodium Didecyl Sulfosuccinate/Sodium Dioctyl Sulfosuccinate CAS 1639-66-3

[chemical composition] sodium dioctyl sulfosuccinate

[type] anion

[technical indicators]

Grade: reagent grade

Appearance: colorless to light yellow viscous liquid

Permeability: ≤ 5 seconds, 1% aqueous solution, 25 ºC

PH value: 5.0 ~ 7.01% aqueous solution

[performance and application]

1. It is easy to dissolve in water. The solution is milky white. It is not resistant to strong acids, strong alkalis, heavy metal salts and reducing agents. It has fast and uniform penetration, and has good wetting, penetration, emulsification and foaming properties. The penetration effect is the best below 40 ºC, and it is easy to hydrolyze in case of alkali at high temperature. It is suitable to heat up the fabric after being treated with penetrant below 40 ºC. Penetrant t is not resistant to strong alkali and cannot be directly added to concentrated alkali solution. The alkali solution should be diluted before adding penetrant t.

2. This product is a high-efficiency penetrant, which is used to treat cotton, hemp, viscose and their blended products. The treated fabric can be bleached or dyed directly without scouring, which can improve the dyeing defects caused by dead cotton, and the dyed fabric feels softer and fuller. During green scouring and bleaching, it is best to remove the slurry first to ensure the penetration effect.

3. When the penetration agent T is used, if there is too much foam, a small amount of defoamer can be added, and GP or octanol or butyl phosphate can be used for defoaming.

4. Used for raw cotton dyeing; Used for pesticide wettable powder.