| Communication Method: | Bluetooth/Lorawan/Cat.1/Nb |
|---|---|
| Display Method: | Digital |
| Warranty Period: | 18 Months |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
DDZY2397 single-phase IoT Bluetooth parent-child electric energy meter consists of one parent meter and multiple child meters. It adopts digital signal processing chip, permanent storage of information, standard LoRaWAN,Cat. 1, Bluetooth and RS485 communication interface, LCD and other technologies. The advanced SMT surface mounting process is adopted for the electric energy meter. The shell is made of high-strength, flame retardant and environment-friendly materials, which is novel, beautiful and applicable. It has high insulation strength and corrosion resistance. The meter integrates many functions, including electric energy metering, information storage and processing, information interaction, etc.
Example: the platform issues instructions that are sent to the corresponding parent meter through the communication interface of LoRaWAN/NB-IoT/Cat.1/WiFi (optional). The parent meter then transmits the instructions to the child meters via Bluetooth. Upon receiving the data, the child meters within multiple ranges will perform corresponding operations based on the child meter information in the data. When the child meters upload data through Bluetooth, the data also contains the entered parent meter information, and the corresponding parent meter sends back the data to the platform after receiving it.
1.Communication modes: Built-in Bluetooth/LoRaWAN/NB-IoT/Cat.1/WiFi communication modules and SIM cards, suitable for 4G/5G operator networks.
2.Electric energy metering: the function of measuring positive active and negative active electric energy. It can measure, store and display the voltage, current, power, power factor, frequency and other operating parameters and status of the current watt hour meter.
3.Remote on-off: send power off command through Bluetooth/LoRaWAN/NB-IoT/Cat.1/WiFi communication modes to cut off the user's load circuit. Or send the power transmission command to connect the user load circuit.
4.Data communication: active upload/two-way transparent transmission function. Actively transmit data to the corresponding platform through Bluetooth/LoRaWAN/NB-IoT/Cat.1/WiFi (optional) wireless network. The default interval is 4 hours (settable).
5.Power Limitation: optional maximum power limitation and intelligent anti-theft electricity. It has overload protection function.
|
Qualification
|
Single Phase Direct Meter
|
|
Standards
|
IEC62053-21, IEC62052-11, DL/T645-2007
|
|
Rated Voltage un
|
220V
|
|
Operating Voltage Range
|
80% Un ~115% Un
|
|
Rated Current Limit ib
|
5A
|
|
Maximum Current: Imax
|
80A
|
|
Starting Current
|
0.4% Ib
|
|
Power Grid Frequency
|
50Hz
|
|
Frequency Range
|
±2%
|
|
Active Measurement Accuracy
|
Class B / 1
|
|
Reactive Measurement Accuracy
|
Class 2
|
|
Active Pulse Constant
|
1600(imp/kWh)
|
|
Reactive Pulse Constant
|
1600(imp/kvarh)
|
|
Clock Precision
|
±0.5S/d (23ºC)
|
|
Normal Operating Temperature Range
|
-25ºC~+55ºC
|
|
Extreme Operating Temperature Range
|
-40ºC~+70ºC
|
|
Transportation and Storage Temperature Range
|
-40ºC~+70ºC
|
|
Power Dissipation
|
<1.5W ,10VA
|
|
The Time that the Blackout Clock Preserves
|
>24h
|
|
The RS485 Interface
|
The default 2400bps, 1200bps, 2400bps, 4800bps, and 9600bps are optional
|
|
LoraWan Frequency
|
CN470,RU864,IN865,EU868,US/AU915,KR920,AS923_1/2/3/4,Custom Channels
|
Installation drawing (unit: mm)
INSTALLTION
Live installation of wiring is strictly prohibited!
The electricity meter shall be installed indoors as far as possible. Special instrument box protection shall be used for outdoor installation. The installation bottom plate shall be fixed on the wall with strong fire resistance and not easy to vibration. There must be no corrosive gases in the surrounding air where the meter is installed. Avoid dust, salt spray, etc.
When using the electricity meter, the wiring must be conducted strictly according to the wiring diagram in the tail cover of the meter. It is recommended to use copper wire for the lead connected to the terminal seat. The screws of the fixed lead in the terminal seat should be tightened to avoid burning the electricity meter due to bad contact and heating.
TRANSPORTATION AND STORAGE
Ammeters must be transported and stored under the original packaging conditions. Products shall not be severely impacted during transportation and unpacking, and shall be transported and stored according to GB / T 25480-2010 Basic Environmental Conditions for Instrument Transportation and Storage and Test Methods as stipulated in 2010. The products should be stored in the warehouse and placed on the platform frame. The stacking height shall not exceed five layers. No corrosive gases shall be present in the stored environment.
Wuhan Time Wave Network Technology Co., Ltd is a high tech enterprise specializing in the application of Low Power Wide Area Network (LPWAN) core technologies to establish an energy monitoring service platform. We provide a one-stop solution and service for our clients, offering metering and communication equipment, software system platforms, project construction, and daily operation and maintenance.
We independently develop and manufacture the "Timewave" brand LPWAN smart energy meters, smart water meters, smart gas meters, and alarm systems, among other communication terminal products. Coupled with the "Timewave Cloud" energy supervision platform, which encompasses metering, meter reading, billing, management, and control of water, electricity, gas, and heat, we can provide and implement automatic meter reading and billing, carbon emission monitoring, safe electricity use, energy consumption analysis, energy-saving analysis, transformer monitoring, data center environment monitoring, and intelligent operation and maintenance. We have a wealth of experience in the practical application of water and electricity meters using LoRaWAN technology.
The "Timewave Cloud" energy supervision platform is widely used in various settings, including campuses, supermarkets, apartments, hospitals, factories, parks, buildings, railways, airports, data centers, and more.We have connected over 200,000 IoT terminals, implemented over 200 projects, and expanded our reach to over 30 provinces and cities across the country. Moreover, we provide operation and maintenance support for ground projects in multiple countries and regions, including Indonesia, Turkmenistan, Laos, Nigeria, and Mongolia.
Timewave IoT Technology is committed to solving issues related to difficult meter reading, billing, payment, energy-saving and efficiency improvement, and safe energy use. We aspire to become a leader in the field of energy IoT and energy supervision platforms.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}