Shanghai Marya Reliable Supplier of Pharmaceutical Cleanroom Sterile Lab Turnkey Project Solution Panel HAVC ISO GMP

Shanghai Marya Reliable Supplier of Pharmaceutical Cleanroom Sterile Lab Turnkey Project Solution Panel HAVC ISO GMP
 

1, Description
Cleanroom enclosing construction is composed of cleanroom panel, cleanroom door, cleanroom window, relative connections, and attachments, which are shown like the following picture:




2, Cleanroom panel


 

2.1 Cleanroom panel standard installation and connection: panels are connected with a built-in aluminum keel and PVC square tube, forming a continuous self-supporting structure; seams between two panels are sealed by silica gel. The roof is fixed by M-8 twisted steel and a holder is on the top of the building. 
2.2 In order to enhance the strength of the cleanroom roof, we can add gypsum or Mgo panel into the color steel panel. People can walk on it and do various maintenance work. Materials' weight needs to be higher than 100 kilograms.
2.3 Cleanroom panel owns high-quality surface materials, which have excellent performances, for example, chemical resistance, wear resistance, scratch resistance, etc.
2.4 Cleanroom panel uses high-quality thermal insulation materials as sandwich materials, and we seal the four edges of panels to avoid pollution due to leakage of sandwich material. 
2.5 The cleanroom panel can be pre-embedded according to the design needs to facilitate the passage of various pipelines, and can also be pre-embedded with reinforcing ribs to ensure the strength of the wall panel.
2.6 Cleanroom panel has a wall system that is quick and easy to install, flexible and multi-selectable components to meet various requirements, and all components of the wall system are connected smoothly and without protrusions.

 

3. Cleanroom door



3.1 It is used in all levels of cleanrooms, purified rooms, dust-free rooms, sterile rooms, movable rooms and places where color steel plates are used as partitions. The surroundings are double-sealed, heat-preserving and heat-insulating. Color steel plates or stainless steel plates can be used to customize cleanroom doors of different specifications; the door locks, colors, and sweeping strips can be configured as required
3.2 Classification: Swing Door (Single Door, Double Door, unique Door, Glass Door), Electric  Sliding Door, Fast Rolling Door
3.3 Classified by different materials: color steel plate door, steel door, melamine resin door, stainless steel door
3.4 The door and the wall panel are connected evenly on both sides, all corners use arc transitions, sanitary lifting hinges, push-type door locks, and automatic sealing strips.
3.5 Door lock and hinge: The structure and design can achieve a smooth connection on both sides, and the door lock system should avoid hand contact pollution.
3.6 Automatic lifting sealing strip at the bottom of the door: three sides of the door frame should use sealing tape and automatic lifting sealing strip at the bottom of the door to ensure the air tightness of the door system.
3.7 Electronic interconnection lock classification: electric plug interconnection lock, electromagnetic interconnection lock, cathode interconnection lock.
 

4, HVAC system



   The cleanroom HVAC system is to maintain the required temperature, humidity, wind speed, pressure, and cleanliness in the cleanroom. The most commonly used method is to continuously send a certain amount of treated air into the room to eliminate various heat and humidity interference and dust pollution inside and outside the cleanroom. In order to obtain a certain state of air sent into the cleanroom, a whole set of systems is needed to process the air, continuously send the air into the room, and continuously remove part of it from the room. This whole set of systems constitutes a cleanroom HVAC system.

5, Flooring engineering


  According to the different needs of the occasion, the ground materials of different materials such as epoxy self-leveling, PVC coiled material and epoxy colored sand ground are used. And it can provide special ground materials with antistatic surface, and at the same time, it can be designed to distinguish different cleanliness levels in different colors in a project. 

6, Windows


6.1 Materials: Aluminum frame clean window; stainless steel frame clean window; one-time forming steel frame clean window;
6.2 Cleanroom window shape: round corner clean window, square frame clean window
6.3 Cleanroom window type: midship clean window, wafer window
6.4 Frame color: black printing, white printing
6.5 Glass form: float glass, tempered glass, fireproof glass, yellow light glass, black silk screen is optional on the four sides;
6.6 The cleanroom window is made of double-layer tempered glass. It has good sealing performance, the wall and the window are on the same plane, and the installation is flexible and beautiful.
6.7 Can be made according to different wall thickness, especially suitable for 50-100mm thick color steel plate;
6.8 Application:suitable for clean workshops such as pharmaceuticals, laboratories, food, biology, electronics factories, etc.
6.9 The hollow double-layer clean window can accept non-standard products of different specifications and models, and can choose different shapes and different grades of glass, such as: tempered glass, fire-resistant glass, bulletproof glass, etc.