Warranty: | 1 Year |
---|---|
Certification: | CE |
Control Type: | Artificial |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
1. Mold evenly brush oil, brush back and forth with a wide brush, brush the new mold should be more oil. 2. The mold plate moving up and down a few times, the screw top and the bottom plate comes into contact. 3. Turn on the water, turn on the water with a movable foot switch pedal to pedal in the end, until the water in the water last.(First mold first feed, add water) 4. Addition, the quantitative good gypsum powder into the mixing bucket. 5. Mixing, stirring for 10-20 seconds to start the motor. 6. Put the pulp, put a good brush oil stirred to die bottom of the barrel, hit the switch to open the pulp slurry was stirred well into the mold until the stream last. 7. Calibrating with a plastic scraper to scrape the pulp mold hole, scrape out the remaining pulp mold mouth gelling. 8. A mold, a new mold die not too late. Chalk can feel a little hard to top 2-5 mm, 1 to 2 minutes over again ejection. |
Model
|
KN-AS800-2
|
Type
|
Electric beating, automatic water supply, assembly line operation, 1 person operation
|
Capacity
|
230000-250000/8h
|
Dimension |
Mold box:640×440×320mm (2pcs)
|
Beating box 1120×690×980mm (1 piece)
|
|
Mold frame box 1500×1500×360mm (1 piece)
|
|
Weight
|
400kg
|
Please Note
|
||||
1. Recently, due to the international shipping cost unstable, almost different everyday. So, no matter the shipping cost displayed on the website is FREE SHIPPING or NOT, the final price with shipment should subject to the actual cost, please confirm with our salesperson before place order.
|
||||
2. About the machine size, please subject to the product description. Please kindly noted there might be some size deviation due to the manual measurement, whichever is actual. If you need the exactly size, please contact our salesman to confirm it again before you place the order.
|
||||
3. Buyers should inspect package / goods carefully before signing receipt of goods. If there is any damages, please take pictures and videos, and please contact with us within 24 hours, we will try to help you to ask the complaints and claims!
|
||||
4. Please note, our machine is belong to the customize product, it don't accept "cancel the order" once arrange the production.
|
Suppliers with verified business licenses