Sand Drying Machine Dryer Sand Dryer Machine Superior Quality Sand Drying Machine Rotary Dryer

Application:
silica sand, river sand, sea sand,machine sand, quartz sand ,slag, clay and other raw materials,

widely used in building material, chemical industry, casting and glass industries etc,

Heating method
It can adapt to the coal, oil, gas and many other fuel.

In order to provide the best quotation for you. Pls let us know the following message.
1.What's the capacity you need? such as 10tph
2.What's the feeding size? such as max size is 1mm
3.What's the final size you need? such as50mesh,60mesh,70mesh,100mesh

Compared to single cylinder dryer the machine length shortens 60%, in favour of process arrangement.
Reduces workshop covered area, reduced the project investment by 40%.

Occupation area: about 20m

Adopted lates technology, cylinder self insulation, thermal efficiency is as high as80% (single cylinder dryer is only 35 percent), thermal efficiency than singlecylinder drying saves coal 68%, yields 100%.

 

Heat-resisting wear-resisting alloy steel plate, four times than ordinary steel wear

-resisting.Long service life and easy maintenance.

High thermal efficiency, outside shell temperature below 60 °C 

(single cylinder dryer outside shell temperature as high as 150°C), 

output of low temperature, discharging temperature below 60 °C.

Output of low temperature, be helpful for dust collector to use a long time, can be directly supporting air tank pulse bag filter.

 

Construction investment reduces 50%, power consumption reduces 60%.
Adopts roller rotation, no need reducer.
Hot air stove can supporting fluidezed bed, spray stove, hands burned furnace, also used in fuel and gas type,can bake the below 20 mm pieces of materials, aggregates, powder material.
After drying the moisture content of materials at 0.5% and below, which can meet different industries requirement.

Special three tube structure, it formed a oneself insulation system through the inside cylinder and the middle cylinder was surrounded by the outside cylinder, the surface of the inside and middle cylinder dryer release invoved in the outside layer in the cylinder materials heat exchanger, thus the outer tube lie in the heat flow low temperature terminal. So the cooling area and heat loss of the cylinder is decreased obviously.

Henan Xingyang Mining Machinery Factory was established in 1996 . Is engaged in mineral processing equipment, product development, engineering and production and sales of new technology enterprises. Enterprises adhere to the implementation of entrepreneurial talent , science and technology, quality in setting development strategy, according to domestic and international market situation, based on the original mineral processing equipment ( crusher, ball mill , flotation machine, magnetic separator , dryer , etc. ) , actively the introduction of advanced high-tech , research and development of a series of energy-saving ball mill , MQG ball mill, flotation machine series , stirred tank , pellet equipment ( Run mill , rotary kiln, balling plate , cooler, coal mill ) and magnesium production line ( zinc oxide production line, limestone lines ) and other products with the leading domestic level , some products have reached the international advanced level.

Service commitment
We are committed to providing timely, rapid, and efficient services for each of our customers.

Rapid reply within 30 minutes
To the issue you consult about, or the feedback from you, we are sure to make reply within 30 minutes to have effective communication.

Providing solution design within 24 hours
According to the results of communication with you, we will within 24 hours provide a design solution, or a solution handling your feedback or e-mail.

Dispatching engineers within 24/72 hours
If we decide to dispatch engineers to support your production, we commit ourselves to dispatching them within 24/72 hours domestically/abroad.

Q:Are you manufacturer?
A:Yes,we are manufacturer.We have our own technical team.Welcome to visit us.

Q:What kind o f payment term you can do?
A:We are flexible about payment terms,we can also help you on financing,  please contact us for details.

Q:What info you need before you make the proposal?
A:The pipe diameter and thickness range which you need or the profile drawings,material information,your special requirements.

Q: What should I do if I just start a new business?
A:Contact us immediately ,we provide free consultant pre-sales service.Also we can help you to solve the material purchase,worker train,international market price.