SMC Production Line

Fully Automatic Resin Mixing Features

1. The control system is controlled by PLC program, which can realize automatic loading.
2. The resin is first put in according to the formula amount set by the program, and is automatically stopped when the formula amount is reached, and then automatically stopped when the low shrinkage agent is put into the formula amount.
3. A resin feed port, a low shrinkage agent feed port and a styrene feed port, a filler feed port are reserved on the Stirring Kettle.
4. The PLC can store multiple different SMC recipes, which can be used by number.
5. Stirring kettle is made of 201 stainless steel for durability.
6. The resin is transported using an imported gear pump or a screw pump with a flow rate of 4-6 cubic meters per hour.
7. Both the Stirring Kettle and the resin storage tank have temperature sensors for monitoring the temperature of the resin paste.
8. The calcium carbonate feed is a vacuum suction conveying method, and the charging time of each calcium carbonate is about 10 minutes.

Fully Automatic Production Line Mixing System Features

1. Composed of three sets of high viscosity gear pumps, mixers and electronic control systems
2. The A, B, and C pumps are driven by servo motors. In the production state, the B and C pumps track the A pump to form a closed-loop control, and are equipped with a mass flow meter with a precision of three thousandths.
3. B, C pump comes with a discharge barrel, the capacity is 100 liters and 50 liters
4. The B and C pumps are all transported by the US Weiken gear metering pump. The A pump uses a Wicken gear pump or an imported screw pump. The A, B, and C pumps are equipped with flowmeters for monitoring the flow rate of the resin paste magnesia paste and the color paste. When any of the components A, B, and C are interrupted, the online system automatically stops.

Parameters