Rubber powder production line from tire recycling equipment
1. Machine introduction of Scrap Tire Recycling Machine:
This scrap tire recycling machine is used for smashing the waste steel tyre and multi-layer rubber, make these tyre become rubber powder.
Processing line:
Waste tyre--cutting ring--cutting strip--cutting block---crushing--filtering--magnetic separating --filtering--finished products.
2. Technical parameters of Scrap Tire Recycling Machine:
Machine Name
Qty
Description
Capacity of Whole Line
Host Machine
Rubber Shredder
1
Waste tyre rubber and miscellaneous plastic pieces were shredded
150-200kg/h
Auxiliary Machines
Ring Cutter
1
Using a knife to slice the tire and tire top joint, make the size of tire and tire top complete separation
Strip Cutter
1
Cut tires into strips the tire sidewall, tire circle reserved
Block Cutter
1
Cut tires into strips 3.5cm square block
Big Shaker
1
Powder for the first time separation (8-10mesh)
Small Shaker
1
Powder for the second time separation (20-30mesh)
Large Conveyor
1
Used for transportation the powder which does not meet the requirement to return back to host machine for continue breaking
Magnetic Separator
1
Extract and separate mental wire from the rubber powder
Fiber Separator
1
Select wool fiber from powder
Steel Separator
1
Separate the crude steel mouth ring and rubber parts completely
Remarks
The above equipments constitute the complete set of scrap tyre rubber powder machine.
Wire hoop separator
1
Special for extract wires in the tire's circle
Fine pulverizer
1
Deep process the rubber powder to 40-100 mesh
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}