Retrofit Coalescing Media for Ows

Retrofit Coalescing Media for OWS:
In a typical oil-water separator with traditional media, incoming oily water slowly flows from the inlet through a media comprised of a series of parallel, inclined plates. As the oil droplets in the water coalesce with other oil droplets on the media surface, the oil droplets grow in size and travel up the plates to the water surface. This design, however, allows some water droplets to by-pass the plates and flow through the separator, requiring secondary polishing filters to achieve the required effluent characteristics. The shapes and configurations of tradition coalescing media also traps particles and sludge on the media itself, resulting in a sludge build-up and a reduction of effective flow through the separator.

The HD Q-PAC media provides improved performance in oil-water separators over traditional media due to the following properties:

- A larger amount of surface area per cubic foot of media allows for greater oil drop coalescence. HD Q-PAC media has 132 ft2/ft3 surface area for oil droplets to contact. Other typical coalescing media have about 48 ft2/ft3 to 68 ft2/ft3.

- A more efficient first step separation reduces the need for a second polishing step. HD Q-PAC media removes 99.9% of oil droplets 20 microns in size and larger. This meets EPA Method 1664 Revision A and European Standard EN 858-1.

- An open design eliminates trapping of particles and subsequent clogging of water channels. Oil water separators with HD Q-PAC media require fewer maintenance shut-downs and separates oil and water faster.

- Where higher-than-normal operating temperatures are required, HD Q-PAC media outperforms its competitors. HD Q-PAC media works effectively in temperatures up to 212°F, versus a maximum temperature of about 120°F for competing media.

Feature:
1:Oil droplet removal efficiency can reach more than 99.98%
2:432 m²/m³ of effective coalescing surface. Removes over 99.9% of oil droplets 20 microns and larger.
3:Will not be degraded by microorganisms or sulfuric acid
4:The combination of a 90°angle of repose, with round smooth vertical surfaces and 87% void volume provide excellent self-cleaning and anti-plugging properties in oil water separators with heavy sludge, dirt and biological growth loadings.
5:Higher design flow rate of empty tower and smaller equipment size
6:Compared with Plastic structured packing, Avoid capillary action or short flow in porous media
7:Light weight, no equpped with support grid
8:100%'s bactiria attaching surface acrea, effectively sustain Flora active state
 

FXSINO is a company specialized in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.

With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our
customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc..

"Abandon some of old rules aims to better development, Never stop our progress because of past achievements "is deeply rooted in FXSINO staff heart. We believe each effort and innovation will let us move little faster than others.

1:Pre-purchase service
Fully understand customer's requirement, and give our professional opinion to help them.

2:User Training
Owing to our product has many different type, so it has many different installation way. For each type product, we must let you know its basically installation way. If necessary, issue one installation manual to them.

3:Warranty services
So called"Warranty services" is repairing replacement of selected parts for a selected period of time. For the first year, the customers are provided with free replacement or repairing of the device for any problem except for Abnormal use environment. For EPC project, we will issue our warranty booklet to our customer for each components. As for unmentioned, we will negotiated with our customer about warranty range and period

4:Online support
24 hours online service. For different problems, we will find related staff to solve with your problem timely.

5:Return and Replacement
In the warranty period, we provide free replacement of the product in case of any queries. Of course, if customers does not agree, we will refund after reduce some fees related with this deal.

6:Outsourcing and guiding installation
For customer's different requirement, Under achieving related fees payed standard(such as worker daily install fees,board and lodging and so on),we can send our installation team to help customer to install product installation. Of course, if you do not need our installation, we also send our engineer to guide how to install. So you would pay for the guiding fees.

Typical Application:
1:Eliminate the need for chemicals in odor-control scrubbers, or improve oil removal efficiency in compact oil-water separators. 
2:Biological filming medium for Aquarium Life Support System in Aquarium
3:Wet scubber tower trickling biofilers