Reinforced Heat Resistance Fiberglass Pipe with Best Warranty:
Fiberglass tubes (Including fiberglass round tube, fiberglass square tube, fiberglass rectangular tube and so on.) are made through pultrusion process.
1. Properties of tube:
A. High strength
Fiberglass tube is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
Fiberglass tube is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
Fiberglass tube will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
Fiberglass tube are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
Fiberglass tube has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of Fiberglass tube is slightly less than steel and significantly less than aluminum.
G. Aesthetics
Fiberglass tube are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
2. Application:
1)Outdoor activities: tent Pole, kite Rod, arrow shaft, ski pole, fishing rod, golf shaft,
sail batten, hockey stick, kick board, skate boards, paddle shafts, bows and arrows, crossbows, golf shafts, slide guides, boat, kayak
2)Tool: umbrella shaft, umbrella rod, curtain rod, fence post, rail, handrail, frame for case and bags, antenna, CB antennas, flag pole, oil sucking rods, bolt, stair, ladder, waste
treatment equipment, greenhouse structures, scaffold, portable work platforms, cooling tower, luggage rack, window/door frame, sign post, bridge structure, bus bar supports,tool handles, bike flags, flag poles, floor gratings, lading bars in trucks and railcars, shoe soles, protective cases for laptops and iPhones
3) Toys:model toy, unmanned aerial vehicles, formula-1 race car
4) Vehicle: motor top sticks, u-shaped motor stator wedges, service truck booms, snowmobile track stiffeners,
high
end automobile components, bicycle frames, glider, kit car,microcar, kart, bodyshell, wind turbine blade,
5) Pipe: gutters, firewater/ cooling water /gas /drinking water/ waste water pipe
6) Building: roofing laminate, flat roof, door surrounds, over-door canopies, window canopies and dormers, chimneys, coping systems, heads with keystones and sillscable reinforcing core, insulators, cable conductor, cable tray, antenna, transformer air duct spacer sticks, cable support trays, switch actuators
3. Color:black, green, yellow, white, red, grey,pink,purple and so on.
Specification and weight of fiberglass tubes as follows:
Specification(mm) |
Weight(g/m) |
4.0*2.0m/m |
18.1 |
5.0*3.0m/m |
24 |
6.0*4.0m/m |
29.7 |
6.3*3.5m/m |
40.9 |
7.0*5.0m/m |
35.8 |
7.5*5.0m/m |
46.7 |
8.0*6.0m/m |
41.8 |
9.0*4.2m/m |
94.7 |
9.0*5.0m/m |
85.7 |
9.0*6.0m/m |
67.3 |
9.0*7.0m/m |
47.8 |
9.5*6.0m/m |
80.8 |
10.0*8.0m/m |
53.7 |
12.0*9.0m/m |
94 |
12.0*1O m/m |
65.8 |
12.7*4.5m/m |
210.8 |
12.7*9.0m/m |
120 |
14.0*5.0m/m |
255.7 |
15.0*12 m/m |
121 |
16.0*8.0m/m |
286.5 |
16.0*12 m/m |
167 |
20.0*16 m/m |
215 |
22.0*16 m/m |
340 |
... |
... |
We can produce all kinds of fiberglass tubes according to customer's need. If you want to know further information, please feel free to contact us. Looking forward to your new cooperation.