Basic Info.
Application Material
Silicon Steel
Cutting Thickness
0.23-0.5mm
PLC
Mitsubishi, or Siemens
Transport Package
Seaworthy Packing
Product Description
JTXE-300 Electric Reactor Silicon Steel Cut to Length Line
Electric Reactor Steel Cut Process Introduction
The reactor silicon steel cutting line can be used for the automatic production of the chip type, and adopts the imported servo control technology, fast speed, lower noise and long life. This equipment is a mechanic photoelectric high-tech product, representing the high standard of domestic silicon steel sheet traverse cutting devices.
Electric Reactor Steel Cut Equipment Composition
1,Guiding Device
a)Using the vertical roller of both sides, it is easy to enter the device of measuring rod
b)The guide roller on both sides is adjusted by hand screw,the guide roller is mounted on a linear guide,two rolls of rubber roller are on the feeding side.
c)Width range:25-400mm
2,Servo Control Setting Device
a)roller structure
b)The equipment is composed of a fixed foot roll, servo motor, synchronous belt gear reducer, base and so on
c)pinch-roll for determining length:two,down roll is Gcr15 alloy steel,after the adjustment, quenching, grinding and polishing,upper roller outer round polyurethane.
d)control:PLC
e)driving power:Taida AC2.0KW servo motor,the corresponding driver controller is matched.
f)Upper roller can be manually driven up and down.
3,High Speed Servo Drive Shears
a)The equipment is a device that can be cut off with a quick cut according to instructions
b)cutting way:the cutting mode is driven by the servo motor driven by the crankshaft, which is cut from the top downwards, and the shear speed is determined by the motor speed.
c)Blade material:hard alloy. blade hardness:HRC88-90
d)composition:it is mainly composed of wallboard, upper and lower knife-edge and blade, guiding mechanism, crankshaft, servo motor and transmission mechanism.
e)drive motor:Taida AC2.0KW servo motor,the corresponding driver controller is matched.
Electric Reactor Silicon Steel Cut to Length Strip Picture
Parameters
1,High Speed High Precision Slitting Line
Model Name | JT1250 |
Cutting Thickness(mm) | 0.23-0.5 |
Cutting Width(mm) | 40-1200 |
Coil Weight(t) | 5 |
Feeding Speed(m/min) | 80-120 |
Straightness Deviation of Each Edge(mm/m) | 0.1 |
Cutting Angle Accuracy DEG | ±0.025 |
Band Width Accuracy(mm) | ±0.1 |
Total Motor Power(KW) | 55 |
2,Precision high speed cut-to-length linenonstop cutting
Two cutting two punching(ordinary type)
Model Name | JTXE-LL-300 | JTXE-LL-400 |
Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
Cutting Width(mm) | 40-300 | 40-400 |
Cutting Length(mm) | 350-9999 | 350-9999 |
Feeding Speed(m/min) | 180 | 180 |
Cutting Burr(mm) | ≤0.02 | ≤0.02 |
Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
Total Motor Power(KW) | 15 | 16.5 |
Two cutting two punching(step type)
Model Name | JTXE-LL-300Z | JTXE-LL-400Z |
Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
Cutting Width(mm) | 40-300 | 40-400 |
Cutting Length(mm) | 350-9999 | 350-9999 |
Feeding Speed(m/min) | 180 | 180 |
Cutting Burr(mm) | ≤0.02 | ≤0.02 |
Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
Total Motor Power(KW) | 20 | 21.5 |
Two cutting two punching(centralized positioning)
Model Name | JTXE-LL-400ZX | JTXE-LL-600ZX |
Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
Cutting Width(mm) | 40-400 | 60-600 |
Cutting Length(mm) | 350-9999 | 350-9999 |
Feeding Speed(m/min) | 180 | 180 |
Cutting Burr(mm) | ≤0.02 | ≤0.02 |
Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
Total Motor Power(KW) | 24 | 26 |
3,Precision high speed cut-to-length linenonstop cutting
Two cutting one punching
Model Name | JTXE-X-300 | JTXE-X-400 | JTXE-X-600 |
Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 | 0.23-0.35 |
Cutting Width(mm) | 40-300 | 40-400 | 60-600 |
Cutting Length(mm) | 350-9999 | 350-9999 | 350-9999 |
Feeding Speed(m/min) | 180 | 180 | 180 |
Cutting Burr(mm) | ≤0.02 | ≤0.02 | ≤0.02 |
Cutting Angle Accuracy DEG | ±0.025 | ±0.025 | ±0.025 |
Cutting Length Accuracy(mm) | ±0.1 | ±0.1 | ±0.1 |
Total Motor Power(KW) | 12 | 13.5 | 13.5 |
4,Center Post Silicon Steel Cut to Length Line(step type)
Model Name | JTXE-ZZ-300Z | JTXE-ZZ-400Z |
Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
Cutting Width(mm) | 40-300 | 40-400 |
Cutting Length(mm) | 150-9999 | 150-9999 |
Feeding Speed(m/min) | 180 | 180 |
Cutting Burr(mm) | ≤0.02 | ≤0.02 |
Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
Total Motor Power(KW) | 14 | 14 |
5,Electric Reactor Silicon Steel Cut to Length Line
Model Name | JTXE-300 | JTXE-400 | JTXE-600 |
Cutting Thickness(mm) | 0.23-0.5 | 0.23-0.5 | 0.23-0.5 |
Cutting Width(mm) | 40-300 | 40-400 | 40-600 |
Cutting Length(mm) | 10-9999 | 10-9999 | 10-9999 |
Feeding Speed(m/min) | 180 | 180 | 180 |
Cutting Burr(mm) | ≤0.02 | ≤0.02 | ≤0.02 |
Cutting Angle Accuracy DEG | ±0.025 | ±0.025 | ±0.025 |
Cutting Length Accuracy(mm) | ±0.05 | ±0.05 | ±0.05 |
Total Motor Power(KW) | 10 | 10 | 12 |
Electric Reactor Silicon Steel Cut to Length Line Working Process
Cut to Length Line Certificate
Cut to Length Line Packaging
Address:
No. 129, Longxi Road, Zhouzhuang Town, Jiangyin, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Manufacturing & Processing Machinery, Transportation
Management System Certification:
ISO 9001
Company Introduction:
Juntao is a professional supplier for machinery, especially transformer core cutting line, transformer making machine and scrap metal recycling machine, such as automatic silicon steel slitting line, CNC high precision silicon steel cut to length machine line, metal baler, metal briquetting press machine, scrap metal shredder and crusher, and the machines and spare parts that related to transformer core making and metal recycling. Our company is located in Jiangyin City, Jiangsu Province, is about 150KM from Shanghai Pudong International Airport, there is also hourly high speed trains from Shanghai to Wuxi, and half an hour′s drive from Wuxi station to our company. It′s very convenient for you to visit our company have a test of our machine.
We concentrate on machine innovation, upgrading and after-sell follow. We keep up with the industry standard and trend, Our workshop have a strict quality control system, we purchase very high quality raw material, spare parts, and each machine must be approved by testing in every progress. With years of professional experience we have good relationship with customers all over China and more than 30 countries, most in Dubai, Russia, India, Thailand, South Africa, Bangladesh, Japan, Indonesia and so on.
Good machines produce bright future! We hold the operation policy of quality first, good credit and users upmost. Our goal is making worldwide customer satisfied with our machines, with our machines we can produce more bright future together.