Products Details
RUCKUS T750 access point (AP)
Outdoor 802.11ax 4x4:4 Wi-Fi AP with 2.5Gbps Backhaul
Benefits
GREAT OUTDOOR WI-FI
Experience high performance outdoor Wi-Fi 6 with IP-67 weather proofing and dual backhaul options with SFP and multi-gigabit 2.5 GbE ethernet port.
CONNECT MORE DEVICES SIMULTANEOUSLY
Improve device performance, by enabling more simultaneous device connections with built-in 8 spatial streams (dual-concurrent, 4x4:4 in 5GHz, 4x4:4 in 2.4GHz), MU-MIMO and OFDMA technology while enhancing non-Wi-Fi 6 client performance. Support for up to 1,024 clients.
HIGH DENSITY PERFORMANCE
Provide exceptional end-user experience within high density public venues such as airports, amusement parks, stadiums, outdoor arenas, and other dense outdoor urban environments with the Ruckus Ultra-High-Density Technology Suite.
CONVERGED ACCESS POINT
Allow customers to eliminate siloed networks and unify Wi-Fi and IoT wireless technologies into one single network by using built-in BLE and Zigbee, and also expand to any future wireless technologies through the pluggable IoT module.
POWER OTHER DEVICES
Daisy chain and power other devices like an IP camera, or another AP directly from the 1 GbE PoE output port.
MULTIPLE MANAGEMENT OPTIONS
Manage the T750 from the cloud, with on-premises physical/virtual appliances, or without a controller.
ENHANCED SECURITY
Reinforce security with WPA3, the latest Wi-Fi security standard and receive enhanced protection from man-in-the-middle attacks.
ACCESS POINT ANTENNA PATTERN
Ruckus' BeamFlex+ adaptive antennas allow the T750 AP to dynamically choose among a host of antenna patterns (over 4,000 possible combinations) in real-time to establish the best possible connection with every device. This leads to:
- Better Wi-Fi coverage
- Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
Specification
General Specifications
| Antenna Gain |
Up to 3 dBi |
| Antenna Patterns, per band |
4000+ |
| BeamFlex |
Yes |
| ChannelFly |
Yes |
| Concurrent Users |
1024 |
| Fiber Interface |
Yes |
| IoT Ready |
Yes |
| PD-MRC |
Yes |
| PHY Rate at 2.4 GHz, maximum |
1148 Mb/s |
| PHY Rate at 5 GHz, maximum |
2400 Mb/s |
| Radio Chains:Streams |
4x4:4 |
| SmartMesh |
Yes |
| USB |
USB 2.0 |
| Wi-Fi Interface Standard |
IEEE 802.11a/b/g/n/ac/ax |
WIFI
| Wi-Fi Standards |
|
| Supported Rates |
- 802.11ax: 4 to 2400 Mbps
- 802.11ac: 6.5 to 1732 Mbps
- 802.11n: 6.5 to 600 Mbps
- 802.11a/g: 6 to 54 Mbps
- 802.11b: 1 to 11 Mbps
|
| Supported Channels |
- 2.4GHz: 1-13
- 5GHz: 36-64, 100-144, 149-165
|
| MIMO |
|
| Spatial Streams |
- 4 for both SU-MIMO & MU-MIMO
|
| Radio Chains and Streams |
|
| Channelization |
|
| Security |
- WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, AES, 802.11i, Dynamic PSK, OWE
- WIPS/WIDS
|
| Other Wi-Fi Features |
- WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v
- Hotspot
- Hotspot 2.0
- Captive Portal
- WISPr
|
NETWORKING
| Controller Platform Support |
- SmartZone
- ZoneDirector
- Cloud
- Standalone
|
| Mesh |
- SmartMesh™ wireless meshing technology. Selfhealing Mesh
|
| IP |
|
| VLAN |
- 802.1Q (1 per BSSID or dynamic per user based on RADIUS)
- VLAN Pooling
- Port-based
|
| 802.1x |
- Authenticator & Supplicant
|
| Tunnel |
|
| Policy Management Tools |
- Application Recognition and Control
- Access Control Lists
- Device Fingerprinting
- Rate Limiting
|
| IoT Capable |
|
PHYSICAL CHARACTERISTICS
| Physical Size |
- 34.64cm (L), 24.06cm (W), 10.17cm (H)
- 13.64in (L) x 9.47in (W) x 4.0in (H)
|
| Weight |
|
| Mounting |
- Pole Mount
- Wall Mount
- Flat Surface
- Bracket included in the box
|
| Operating Temperature |
- -40°C (-40°F) to 65°C (145°F)
|
| Operating Humidity |
- Up to 95%, non-condensing
|
| Wind Survivabiity |
|
Our Company Information
Cooperation clients
Our Inventory
Comany Service
About Packing&Delivery
For Packing
Original Factory Sealed Box (packaging) + Extra Carton Protection + Tape Seal = Waterproof + Anti-collision
Customer Reviews
Audited Supplier 
){kind=link}
){kind=link}