Programmable Full Automatic Fine Wire Half Moon Coil Winder Winding Machine

                          GWV10-PLC Automatic Micro Toroidal Winding Machine


GWV60 Winding Head:

The applicable wire diameter range is 0.06mm-0.6 mm (the specific range depends on the specifications of the selected wire storage trough);

The minimum completed inner diameter is 1.5mm (the specific range depends on the specifications of the selected wire storage trough);

The maximum completed height is 10mm (the specific range depends on the specifications of the selected wire storage trough);

The maximum completed outer diameter is 5-30mm;

The maximum winding speed is 1800 RPM (the specific range depends on the specifications of the selected wire storage trough).

Technical Parameters:

Controller: using PLC programmable controller
Memory: 60 programs, 8 sets of steps
Program settings: Use simple numerical values or button input settings
Winding speed: maximum speed 1800RPM, wire storage speed and winding speed can be set Skeleton drive: stepper motor
Line distance control: Line distance is automatically adjustable
Skeleton adjustment: automatic adjustment/manual adjustment
Skeleton reversal: automatic adjustment/manual adjustment
Acceleration: automatic
Deceleration: automatic
Tap stop: automatic
Winding operation: fully automatic
Machine head drive: servo motor 400 watts
Tension control: adjustable
Working voltage: 230 (110 AND 240) VOLT, 50HZ
Machine size: 700L×600W×600H (mm)
Machine weight: 80Kg NET, 110KG Gross

Host power: The main power is a precision servo motor
The power of the cable is driven by the stepper motor with precise subdivision

Controller: * The controller has an LCD interface display, Chinese and English layouts can be
switched between each other, and can store 60 sets of steps program, 8-segment product program,  real-time display of operating parameters (such as storage/winding, speed, number of turns, output and product number, etc.

* The program can set acceleration and deceleration to avoid impact breakage, the number of turns is accurate, and copper wires are saved.

* Actual input of the inner and outer diameter, wire diameter and wire spacing values of the magnetic ring without repeated debugging is required.
Precise wiring, with manual acceleration and deceleration and adjustment of wiring distance during production, as well as magnetic core manual control of reversing and other functions.

* Can be completed automatically: dense winding, sparse winding, multi-layer winding, forward and reverse winding, segmented winding, multi-thread parallel winding, etc.winding method.

* The main motor is a 400-watt servo, with constant torque and precise rotation, and the magnetic core clamp is driven by a stepper motor neat and beautiful wiring.

The winding machine head is a mechanism specially used for winding. It uses wire storage to quickly store the total required copper wire for winding on the iron core store it in the slot, and then wind the wire around the iron core.

Roller stand is a mechanism that specifically clamps the iron core firmly and winds the rotation gap.

Toroidal Winding Machine Application:

Grewin Industrial Group Co., LTD, founded in 1993, is one of China's largesttoroidal winding machine manufacturers.