ST30D plastic dropper bottle injection blow moulding machine adopts three cylinder for ensure stable clamping force & two pumps guarantee pressure.
ST30D Injection blow molding machine.
Description of machine.
A). Adopt YUKEN valves & pumps, JINGHUA semi-computer controller & Siemens motor, FESTO air valve.
B). Applying in DUCTILE CAST IRON can bear high strength not deforming, plate smooth for horizontal injection.
C). Adopt single beam & double pillar design, which highly enlarge the rotation space for 180mm cosmetic bottles & large mould, also mould assembling & removing easier.
D). Applying in double assistant cylinder helpful to main injection cylinder, higher speed mould clamping/opening & save energy as well as providing stable clamping force.
E). Adopt two pumps, one is for hydraulic action & other for mould clamping, which guarantee the 400× 300mm big mould required clamping force.
F). Applying in six-poles motor, lower noise & save energy
Specification of IBM products.
A). Neck part is made by injection providing the mouth & screw precision, can 100% matching cap, no any leakage.
B). No clamping line at bottom & clamping line at body side smooth for labeling. Bottle with balance wall thickness & No flash to save material.
C). Body & bottom with strong mechanical strength
| NO. |
Item |
Unit |
Data |
| 1 |
Screw diameter |
MM |
40 |
| 2 |
Max. theoretical capacity |
cm 3 |
158 |
| 3 |
Cylinder-heating power |
KW |
6.5 |
| 4 |
Heating zone |
Zone |
3 |
| 5 |
Clamping force of injection mold |
KN |
300 |
| 6 |
Opening stroke of injection mold |
MM |
120 |
| 7 |
Clamping force of blow mold |
KN |
30 |
| 8 |
Opening stroke of blow mold |
MM |
120 |
| 9 |
Idle time |
S |
6 |
| 10 |
Max. plate size of mold L× W |
MM |
400× 300 |
| 11 |
Min. mold thickness |
MM |
180 |
| 12 |
Motor power |
KW |
15 |
| 13 |
Mold-heating power |
KW |
Tailor-made |
| 14 |
Pressure of hydraulic system |
MPA |
14 |
| 15 |
Max. working pressure of compressed air |
MPA |
1.2 |
| 16 |
Discharge rate of compressed air |
m 3 /min |
≥ 0.8 |
| 17 |
Consumption of cooling water |
m 3 /h |
3 |
| 18 |
Dimension of machine (L× W× H) |
MM |
3100× 1100× 2200 |
| 19 |
Machine weight |
T |
2.5 |
| 20 |
Volume of formable products |
L |
0.003-0.6 |
| 21 |
Height of formable products |
MM |
≤ 190 |
| 22 |
Diameter of formable products |
MM |
≤ 100 |
| 23 |
Conveyer belt of motor power |
KW |
0.37 |
| 24 |
Total power |
KW |
22.5 |
Any question,please call me.
MOB&waspp: +8613773240086
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}