Material Quality: | Stainless Steel |
---|---|
Quality: | Perfect |
Color: | White |
Transport Package: | FCL |
Specification: | 7299mm× 5384mm× 4460mm× |
Trademark: | Skywiretech |
Customization: |
---|
Suppliers with verified business licenses
Equipment Name: Squaring & Grinding Integrator
Equipment size:(L)7299mm×(W)5384mm×(H)4460mm
No. | Item | Value |
1 | Processing capacity | |
1.1 | Ingot length(mm) | 200-900 |
1.2 | Ingot diameter(mm) | 230-350 |
1.3 | Brick width(mm) | 166-230 |
2 | Processing quality | |
2.1 | Side length(mm) | ±0.05 |
2.2 | Perpendicularity | 90°±1.8′ |
2.3 | Flat conicity(mm) | ≤0.05 |
2.4 | Flat gradient(mm) | ≤0.05 |
2.5 | Flat roughness | (Flatness)Ra<0.1 (Circle)Ra<0.2 |
3 | ||
3.1 | Average processing efficiency(M10 Chamfering x800mm) (min/pcs) | 27 |
3.2 | Production capacity (T/day) (Assumption: the ingot is M10x800mm, chamfering.The work time is 22 hours a day, and the equipment utilization rate is 85%) |
Rods3.9/Bricks2.44 |
4 | Consumable specification | |
4.1 | Perimeter of ring wire(mm) | 4100 |
4.2 | Diameter of ring wire(mm) | 0.42mm/0.50mm |
4.4 | Wire tension(N) | 70-120 |
4.5 | Wire speed(m/s) | 1-50 |
4.6 | Feeding speed(mm/min) | 20-1600 |
4.7 | Rough grinding wheel(mm) | Φ304*40*Φ100*15*9 |
4.8 | Fine grinding wheel(mm) | Φ354*76*Φ200*15*9 |
4.9 | Rough grinding chamfer wheel(mm) | 150-200 |
4.10 | Number of fine grinding wheels | 500-800 |
4.11 | Grinding wheel motor rotation speed(rpm) | 0-4000 |
5 | Consumption | |
5.1 | Total power(kw) | 80 |
5.2 | Power consumption(Kw/h) | 22 |
5.3 | Power supply | Three-phase 380V 50Hz |
5.4 | Water-inlet pressure(bar) | 0.3-0.5 |
5.5 | Water consumption(m3/h) | 7.2~9 |
5.6 | Air-intake pressure(bar) | 0.5-0.7 |
5.7 | Air consumption(m3/h) | ≤16 |
5.8 | Lubrication | Lubrication adopts self lubrication or grease lubrication, and the lubricating grease adopts 0 # or 00 # extreme pressure lithium grease. ,0#00#. |
6 | Equipment specification | |
6.1 | Equipment size (mm) | (L)7299mm*(W)5384mm*(H)4460mm |
6.2 | Equipment weight (T) | About 32 |
6.3 | Static load(KN/SQM) | 23 |
Note 1: For materials, the deviation of the upper and lower ends of the bar shall be ≤ 2mm. |
Suppliers with verified business licenses