Wpc Door And Window Profile Extruder Making Machine Extrusion
1,Machine in stock
2, Exhibition and customer
3, WPC door frame and UPVC window profiles making machine Project introduction
pvc profile extrusion line is optimumly designed by referring to the latest overseas technology, it bears the features of even plasticization, low cutting rate, high output, and long lifespan, etc. And it composes conical double-screw extruder, vacuum sizing platform, tractor, cutting and film coating machine and material stirring bracket,etc.
The PVC WPC profile extrusion line is suitable for producing PVC windows and doors profiles. This profiles have advantages of fireproof, waterproof, anticaustic, moisture proof, moth proof, mildew proof, non-toxic and environmentally friendly. The profiles are widely used in the fields of interior decoration, furniture making, such as door frame, skirting, photo frame, plastic door and window profiles.
4,UPVC window profiles and WPC door frame extrusion line model
| Model |
Profile Width |
Extruder model |
Motor power |
Max.extrusion capacity |
Calibrating platform length |
| HGMSC-200 |
200mm |
51/105 |
22kw |
100-120kg/h |
4000mm |
| HGMSC-300 |
300mm |
65/132 |
37kw |
150-180kg/h |
6000mm |
| HGMSC-400 |
400mm |
65/132 |
37kw |
150-180kg/h |
6000mm |
| HGMSCD-300 |
600mm |
65/132 |
37kw |
150-180kg/h |
8000mm |
| HGMSC-600 |
600mm |
65/13 or 80/156 |
37 or 75kw |
150-350kg/h |
6000mm |
4,PVC window profiles extrusion line details
5,Final Products PVC window profiles application
1 According to the opening method, it is divided into: fixed windows, top-hung windows, middle-hung windows, bottom-hung windows, vertical swing windows, side-hung doors and windows, pulley side-hung windows, pulley windows, side-hung lower doors and windows, sliding doors and windows, sliding side-opening Windows, folding doors, floor spring doors, lifting sliding doors, sliding folding doors, and inverted sliding doors.
2. According to performance, it is divided into: ordinary doors and windows, sound insulation doors and windows, and thermal insulation doors and windows.
3. According to the application part, it is divided into: inner doors and windows, outer doors and windows.
6,Relate Products made by our company
Qingdao Tongsan Plastic Macxhinery CO.,LTD is professional for the Whole WPC production line with turnkey Project Service since 1997.We have all the WPC machines in factory stock and can be tested at anytime.
We have different type of WPC machines to make different WPC products from different raw material,
1, PVC WPC profile machine:
Material: 50%PVC+20% wood+20% caco3+ Chemical additives.
Product: WPC door frame, WPC wall panel, WPC decoration profiles indoor.
HGMSX series profile production line can continuously produce PVC/WPC profile,such as door and Window, wall panel, skirting etc.The production line consists of extruder, mould, calibrating platform, haul off and cutting machine and stacker.The extruder can produce PVC and WPC material profile by changing screw and mould.The calibrating platform adopts two-section structure and adopt double water tank, to ensure the stability of machine in production.The haul off and cutting machine is one body structure, the advantages of this unit are saving space and high precision cutting ,this unit also equip with dust collection system.The production line can optionally equip with PLC.
| Model |
Profile Width |
Extruder model |
Motor power |
Max.extrusion capacity |
Calibrating platform length |
| HGMSC-200 |
200mm |
51/105 |
22kw |
100-120kg/h |
4000mm |
| HGMSC-300 |
300mm |
65/132 |
37kw |
150-180kg/h |
6000mm |
| HGMSC-400 |
400mm |
65/132 |
37kw |
150-180kg/h |
6000mm |
| HGMSCD-300 |
600mm |
65/132 |
37kw |
150-180kg/h |
8000mm |
| HGMSC-600 |
600mm |
65/13 or 80/156 |
37 or 75kw |
150-350kg/h |
6000mm |
2, PVC WPC door machine:
Material:50% PVC+20% wood+20% caco3 +Chemical additives.
Product: Hollow Door panel, Cabinet Door, and other big profiles
HGMSM series door panel production line can continuously produce PVC/WPC door panel.The production line consists of extruder, mould, calibrating platform, Haul off machine, cutting machine and stacker.The extruder adopts specially designed screw, to ensure the door panel extrude steadily and foam uniformly.Calibrating platform adopts one body structure with adequate material.In case of shaking during production. Haul off machine adopts twin tracker structure ,the material of rubber block is silica gel.The haul off force is big and the speed is uniformly .Cutting machine adopts saw blade cutting, equipped with dust collection device.The production line runs stably and reliably during production.
| Model |
Door panel width |
Door panel thickness |
Extruder model |
Motor power |
Max extrusion capacity |
Calibrating mould section |
| HGMSM-800 |
800 |
20-50mm |
SJMS 80/156 |
75kw |
350-380kg/h |
2 |
| HGMSM-1000 |
1000 |
20-50mm |
SJMS 92/188 |
110kw |
450-500kg/h |
3 |
| HGMSM-1200 |
1200 |
20-50mm |
SJMS 92/188 |
110kw |
450-500kg/h |
3 |
3, PVC WPC board machine:
Material: 60% PVC+10% wood +20% CaCo3+ Chemical additives.
Product: Solid door panel, Furniture board, partition wall panel, decoration solid panel.
SJMSB series PVC/WPC foam board production line can continuously produce PVC WPC foam board.This production line is composed of extruder, mould, calibrating platform, cooling frame, haul off machine, cutting machine and stacker.The extruder adopts special screw. Calibrating platform equip width high efficiency cooling calibrator. Haul off machine adopts gear transmission to ensure uniform speed and high stabilize.The customer can also produce A+B+A three layers co-extrusion foam board by adding extruder and distributor .The machine should equip with water chiller, can increase production efficiency.
| Model |
SJMSB-80/156 |
SJMSB-80/173 |
SJMSB-92/188 |
| Board thickness |
5-18mm |
3-30mm |
20-40mm |
| Board width |
1220mm |
1220mm |
1220mm |
| Max extrusion capacity |
350-380kg/h |
420-450kg/h |
500-550kg/h |
| Motor power |
75kw |
90kw |
110kw |
4, PP PE WPC granulating machiner
Material: recycled 30% PP/PE+70% wood powder+chemical additives.
Product: WPC decking, WPC wall cladding, WPC fence, WPC pergola..
SHMS series granulating machine is used for making WPC pellets. The WPC pellets produced by WPC granulating machine can used for making WPC product using WPC machine.The granulating machine consists of parallel double-screw extruder,water cooling system, a granulator and air conveyor cooling system.The feeder and hopper are equipped with mixer to prevent the material blocked up.If customer do not have strict requirements about the appearance of pellets, the granulator can be removed.The pellets extrude by extruder directly, then go for crusher. Can improve the production capacity.
| Model |
L/D ratio |
Max.capacity |
Motor power |
Suitable material |
Max.rotating speed |
Wood powder percentage |
| SHMS-65 |
40:1 |
200-220kg/h |
75kw |
Pe+wood powder |
500r/min |
≤75% |
| SHMS-75 |
40:1 |
300-350kg/h |
90kw |
Pe+wood powder |
500r/min |
≤75% |
| SHMS-90 |
40:1 |
500-600kg/h |
132kw |
Pe+wood powder |
500r/min |
≤75% |
5,PP PE WPC profiles machine
HGMSE series PP/PE WPC profile production line can continuously produce PP/PE WPC profile. The WPC profile adopts two -step production process. The granulating machine make WPC pellets using PP/PE recycled materials, wood powder and auxiliary agent. Then use this production line produce WPC profile.Customers can choose embossing machine for the production line to achieve 3D pattern performance.Customers can also make PE WPC single color or double color co-extrusion profile by adding extruders.The profile produced by this production line can be sanded and brushed by sanding machine and brushing machine.
| Model |
HGMSE-65 |
HGMSE-80 |
| Extruder model |
SJMS65/132 |
SJMS 80/156 |
| Motor power |
37kw |
75kw |
| Mac.Extrusion capacity |
140-160kg/h |
220-250kg/h |
| Co-extruder(Optional) |
SJ35/28 |
SJ45/28 |
7,Our service
Before order
1,Customized the production line and auxiliary machine according final products,and show all technical parameter to buyer,provide the turnkey project to customer.
2,Free machine running when customer visit our factory for quality inspection .
3, Design the mold drawing according customer requirements.
4,Design the machine layout and water and electricity layout according buy factory.
5,Any technical parameter support if customer in need.
In production
1,Confirm the mold drawing after received the down payment.
2,Start the product asap and updates the production status every 10 days.
3,Confirm the water and electricity layout and other accessories,ensure plant preparations well before the machines arrives.
4,Determine raw material preparation in customer factory.
5,Within 60 working days after receiving the advance payment, the seller shall notify the buyer to carry out the inspection
6,Arrange machine and mold testing to ensure customer or third party inspection satisfaction.
7,The seller shall complete the packing of the goods within 15 working days after receiving the full payment and be ready to ship.
8,The seller shall inform the buyer of the exact loading time and the buyer shall arrange to supervise the scope of the loading.
Machine in customer factory
1,After determining the date of the machine arrived customer's factory, arrange our professional engineer to install and debug the machine.
2,What the engineer should to do at the customer's plant:
2.1 Quickly install, debug the machine to normal operation and ensure product good quality products.
2,2 Provide the formula for production.
2.3 Teach workers how to use and maintain machines,solutions to daily problems in production
2.4Any production technical support for customer need.
3,Technical support online
If any problems when production we will reply online asap,within 24 hours to give the solution.
4, Warranty
4.1 Warranty period: 12 months from the first day of operation of the machine in the customer's warehouse
4.2 The seller shall guarantee that service and spare parts are free of charge throughout the warranty period of the equipment.
4.3Lifetime service: After the 12-month warranty clause, the seller should provide lifelong service for the goods sold and provide the buyer with the payment for the required spare parts.
8,RFQ
1. Why choose us
We are the first manufacturer in Qingdao to develop plastic extruders. We have 22 years of experience in mechanical manufacturing. What we pursue is machine quality and customer satisfaction. Please make sure that we have the strength to provide you with high-quality machines and perfect services.
2. What service do we provide?
Turnkry project service, 24-hour online technical service.
3. Payment terms
30% of the total amount should be paid by wire transfer as a down payment, and the balance (70% of the total amount) should be paid (at sight) before the delivery of the wire transfer or irrevocable letter of credit
4. Delivery terms:
4.1 Delivery terms: FOB Qingdao Port.
4.2 Delivery deadline: within 60 working days after receiving the advance payment, the seller shall notify the buyer to inspect. The seller should complete the packaging of the goods within 15 working days after receiving the full payment and be ready for shipment.
4.3 Loading supervision: The seller should inform the buyer of the exact loading time, and the buyer should arrange a time for supervision of the loading.
5. Warranty terms:
5.1 Warranty period: 12 months from the first day of operation of the machine in the customer's warehouse
5.2 The seller shall guarantee that the service and spare parts are free during the entire equipment warranty period.
5.3 LIFELONG service: The seller shall provide LIFELONG service (sold goods) after the 12-month warranty, and the buyer shall pay for the required spare parts.
6. Inspection:
After the machine is completed, the seller should notify the buyer to inspect before delivery, and the seller guarantees that all the goods sold are of good quality. The seller does not bear the material cost of the machine inspection in the seller's factory. The buyer should come to the seller's factory for inspection, or the buyer can invite any third party to enter the seller's factory for inspection.
7. Installation and equipment debugging:
If the buyer needs it, the seller should send a team of technicians to the buyer's factory for installation and testing, and the buyer should release the knowledge of the entire food/location and surrounding traces (aircraft, food, hotel, etc.), and charge the engineer $100 /Day/engineer's cost.
9,About our company
){kind=link}
){kind=link}