Basic Info.
Product Description
Ptz controller
Tracking dome have two modes, including auto track and manual locked track.
Enter auto track mode by call 88th preset.
The users select the object in the field of view, move the object to the middle of the field of view, pressing 'OPEN'key, the track dome enters manual locked mode, the dome will trace the motion path of this target by itself after that. It will exit manual track mode when there is any manual operation.
1. Tracking target
Can set to track the target which one of the most Vigorous movement and the first enters the field of view.
2. Tracking sensitivity
Can set sensitivity of auto track, devided into low, medium, high and very high
3. Tracking window
It is convenient for users to check the current target, can display or close the track window.
4. Cross centre
The cross centre is the middle position of screen, can display or close the cross centre.
5. Tracking alarm
When the object enters the field of the view, users can set alarm linkage by menu after starting the tracking.
Tracking target
1. Call 95th preset to call-out main menu. Remove the joystick up and down, select "TRACK", enter "TRACK"menu by 'OPEN'oder.
2. Select "TRACK TARGET", enter "TRACK TARGET" by 'OPEN'oder, remove joystick or to select "FIRST IN"(the first enters the field of view) or "MOTION"(the most Vigorous target), Use 'OPEN'order to save and exit after selecting.
Main feature
1. Built-in decoder
Programmable Digital design, keep the data or action after power outage.
Integrated design, high reliability
Memory protected when power outage: The dome auto resumes its prior position before the power outage after reboot.
Power up auto run funcion, setting automatically resumes its prior position or action before the power outage, run home position, preset, cruising tracks, pattern scan, right≤ft scan, frame scan
Leisure auto run function, run home position, preset, cruising tracks, pattern scan, right≤ft scan, frame scan.
8 channels timeing function, select timing startup preset, auto cruising, pattern scan, auto scan ect. Actions(appoint type dome)
256 presets saved at casually
Auto cruising function, 6 cruising tracks, each cruising track set up 18 preset postions, set staying time of each preset position and scan speed by menu.
4 pattern scan, each piece can record 5-500 minutes
Three-dimensional position magnify, Point and magnify, point by mouse and frame the object, then it display in the centre of screen and magnify.
Coordinate display, display current flip and pan angle and lens magnify times.
Support RS485 Bus interface.
8 privacy masking zones(zone masking)
Hiding the title information(except dome title)
Timeing Color/B& W Auto Shift
Time, temperature display and time calibrated function
Soft address switch amend function, soft protocol and soft baud rate: Amend front address switch of the dome by back controlling equipment, setup according to actual needs after installing all domes.
Support broadcast address, the NO. 255 is broadcast address.
Front equipment malfunction information feedback: Transfer front malfunction information to back command centre through video signal that the users find cause of equipment malfunction conveniently.
Alarm linkage, 7 alarm input, 2 alarm output
2, Built-in pan-tilt
Exact driver, run placidly, sensitive response, accurate definition.
Integrated design, compact fabric
Ingenious mechanical driver device, support Pan 360° Continously rotate, without monitor blind points.
Horizontal 0.25° /s slowly rotate, image not quiver, maximum rotate speed 400° /s
Vertical 180° Continous monitor.
3. Built-in integrated digital color camera which takes it's own zoom lens, high
Auto focus
Auto light control
Auto white balance
Auto color/B&W shift
4. Screen menu
Address:
No. 39 Xiangyuan Road, Gongshu District, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Security & Protection
Company Introduction:
Hangzhou Soar Electronics Co., Ltd. (Soar) is a professional high-tech corporation which specializes in the R&D, production and sales of wired television monitor systems. We produce photic communication and monitor equipment such as Matrix Switcher/Controller System, Power Dome Speed Dome Cameras and Fiber Optics. Those products can be widely applied to banks, airports, traffic monitor systems, governmental departments, electric power systems, prisons, hotels, department stores, factories, schools, museums and intellective residences. We set up our R&D and production base in Hangzhou and have developed a strong sales network in China. With cuspidate technique and eximious quality, reasonable price and perfect service, Soar has won fine reputation among customers worldwide. Soar will keep on producing high quality products and unceasingly innovating and perfecting our products. We welcome you to consult us. Your recognition is our jumping-off point and your satisfaction is our final goal. Soar sincerely looks forward to cooperating with your together for a bright future.