| Noise: | <95dB |
|---|---|
| Hi-Fi: | Not Hi-Fi |
| Activity: | Passive |
| Operation Mode: | Wire / Remote Control |
| Speaker Material: | Metal |
| Application: | Commercial, Home |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Description:
Its Dante 4x4 input/output inerface can add 4 channels (input and output) to the existing network audio system with low cost. it is small and compact that can be installed in anywhere and save space. Therefore, you don't need to use other expensive analog connection which often causes interference.
Features:
•It is compact and easy to use, which can connect to analog signal source or receiver directly.
•Adopting high index DC power to ensure the amplification of the built-in electric microphone,
•The gain is +10dB-+50dB(XLR),Line level is -10dB-+40dB.
•Each channel has phantom power +48v to supply electric mic.
•The maximal output level of the 4 line is +22dB without overloading, meeting the requirements of consumer and professional audio application.
•The volume of each channel can be adjusted independently.
Specification:
| Model | 521895 |
| Microphone/Line input | Balanced type,3 pin interface with RF filter |
| Phantom Power | +48V |
| Mic/Line gain | 0dB |
| Input impedence | Greater than 6800Ω,the gain can be set to any value |
| Equivalent input noise | -115dBu(Gain:+40dB) |
| Maximum input electrical level | +8dBu @ 0dB gain, -16dBu @ +25dB gain,-31dBu @ +40dB gain |
| Output type | Balance circuit,it will be mute when loses single of Dante |
| Output Gain | 0dB |
| Output S/N | Less than -90dBu when gain is 0dB |
| Max output electrical level | +12dBu |
| THD | Less than 0.01% |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}