Suzhou, Jiangsu, China
Member Since: 2011
Business Type: Manufacturer/Factory
|1||High efficiency PP-R PE-RT PB pipes are widely used in the uptown apartment and village cables protection hot water supplying house heating. |
|2||This production line adopts high efficiency single screw extruder equipped with the Siemens PLC controlling system. |
|3||It can ensure the whole line automatic controlling of high capacity stable extruding with the suitable changing of different units could realize the production job of PP-R PE-RT PB pipe.|
|1||It's for high speed extruding PE PPH PPR PPB PERT and PB etc line speed is up to 25m/min.|
|2||L/D=38 double mixer and barrier screw which can ensure 100% plasticization before going into die with spiral groove on feeding part it increases 30% of productivity.|
|3|| Die with spiral mandrel it ensures no delay in the flow channel which can improve pipe quality.|
|4|| Particular disc design on calibration sleeves which ensures high speed extrusion.|
|5||Double-strand vacuum tank is controlled individually which makes convenient operation as single one.|
|6||Double haul-off is also controlled individually which makes convenient operation as single strand additionally with the upper caterpillar belt stop device to ensure roundness of pipe.|
|7||With individual designed of chipless cutter. Driven by motor and synchronous belts which ensures normal cutting during high speed running.|
|Model||Pipe range(mm)||Extruder Model|
|SWD-63||Φ20-63||SJ65/33 or SJ65/38|
|SWD-110||Φ20-110||SJ65/33 or SJ65/38|
|SWD-160||Φ50-160||SJ75/33 or SJ75/38|
|SWD-250||Φ90-250||SJ75/33 or SJ75/38|
|Pipe Extrusion Single Screw Extruder|
|Pipe Extrusion Die Head|
|Pipe Extrusion Vacuum Calibration Tanks|
|Vacuum Calibration Tanks are used for calibrating and cooling pipes made of thermoplastic materials by means of spray cooling. The spray cooling method prevents the formation of water boundary layers and is more efficient in cooling than the full water tanks.|
Furthermore, there are no buoyancy problems that could distort the pipe. Spray-cooling increases the heat exchange rate significantly, compared to full-water-bath cooling. However, optionally all tanks can be supplied as full water tanks.
|Pipe Extrusion Haul-off Unit|
Belt haul-offs are used for continuous extraction of pipes and profiles. They are known for especially consistent performance even at high production speeds. The belts are driven by brushless AC servo drives. Both belt carriers can be mechanically or pneumatically adjusted in height. The belts can also be supplied with a cellular vulcanised or rubber layer.
Depending on pad type, dual caterpillar haul-offs can be used for pipes or profiles. Multiple caterpillar haul-offs are used for pipe take-off. The lower caterpillar carriers are adjusted manually, the upper caterpillar carriers are suspended and are pneumatically adjusted.
Pipe extrusion Cutting Machines
Pneumatically activated radial saws suitable for cutting pipes and profiles. Easy operation of the saw on start-up of the extrusion line thanks to the possibility of raising the upper double pipe clamps. Clamping jaws according to the pipe diameter or profile shape guarantee an angular cut.
Pneumatically or hydraulically activated cutting knife for burr-free cutting of pipes or profiles.
For chip and burr-free cutting by means of rotating knife.
Excellent accuracy of cut length
Low energy consumption
Low noise level by using special cutting tools and shielding the machine
Cutting tools and enclosure of the machinesTools are easy to change