Basic Info.
Transmission Rate
10/100/1000Mbps
Motherboard Integrated
Separate Network Card
Type of Network
Gigabit Ethernet
Connector
RJ45 Port Realtek LAN Card
Color
Green Realtek LAN Card
Package
Unique Standard and Safety
Transport Package
Blister Package and Brown Box
Specification
CE FCC ROHS
Origin
Shenzhen, Guangzhou, China
Product Description
PCI-Express x1 10/100/1000Mbps 1*RJ45 Realtek Network Lan Card (RTL8111F Based)
Description:
LREC9232MT Gigabit Ethernet card combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, PCI Express bus controller, and embedded memory. With state-of-the-art DSP technology and mixed-mode signal technology, the LREC9232MT offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented to provide robust transmission and reception capability at high speeds.
The LREC9232MT is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet. It also supports an auxiliary power auto-detect function, and will auto-configure related bits of the PCI power management registers in PCI configuration space.
Advanced Configuration Power management Interface (ACPI)-power management for modern operating systems that are capable of Operating System-directed Power Management (OSPM)-is supported to achieve the most efficient power management possible. PCI MSI (Message Signaled Interrupt) and MSI-X are also supported.
In addition to the ACPI feature, remote wake-up (including AMD Magic Packet™ and Microsoft® Wake-up frame) is supported in both ACPI and APM (Advanced Power Management) environments. To support WOL from a deep power down state (e.g., D3cold, i.e. main power is off and only auxiliary exists), the auxiliary power source must be able to provide the needed power for the LREC9232MT.
The LREC9232MT is fully compliant with Microsoft® NDIS5, NDIS6(IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload(Large send and Giant send) features, and supports IEEE 802 IP Layer 2 priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN). The above features contribute to lowering CPU utilization, especially benefiting performance when in operation on a network server.
The LREC9232MT supports Receive Side Scaling (RSS) to hash incoming TCP connections and load-balance received data processing across multiple CPUs. RSS improves the number of transactions per second and number of connections per second, for increased network throughput.
The device also features inter-connect PCI Express technology. PCI Express is a high-bandwidth, low pin count, serial, interconnect technology that offers significant improvements in performance over conventional PCI and also maintains software compatibility with existing PCI infrastructure. The device embeds an adaptive equalizer in the PCIe PHY for ease of system integration and excellent link quality. The equalizer enables the length of the PCB traces to reach 40 inches.
The LREC9232MT is suitable for multiple market segments and emerging applications, such as desktop, mobile, workstation, server, communications platforms, and embedded applications.
Features:
Integrated 10/100/1000 transceiver
Auto-Negotiation with Next Page capability
Supports PCI Express™ 1.1
Supports pair swap/polarity/skew correction
Crossover Detection & & Auto-Correction
Wake-on-LAN and remote wake-up support
Microsoft® NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send and Giant send) support
Supports Full Duplex flow control (IEEE 802.3x)
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Serial EEPROM
Transmit/Receive on-chip buffer support
Supports power down/link down power saving
Supports PCI MSI (Message Signaled Interrupt) and MSI-X
Supports Receive-Side Scaling (RSS)
64-pin QFN package (Green package)
Embeds an adaptive equalizer in PCI express PHY (PCB traces to reach 40 inches)
Networking Protocol:
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
NOS Software Support:
Microsoft Windows 7
Microsoft Windows Vista (32 & 64 bit)
Microsoft Windows XP (32 & 64 bit)
Microsoft Windows CE
Microsoft Windows NT
Microsoft Windows 2000 Server
Microsoft Windows Server 2003 (32 & 64 bit)
SCO UnixWare 7.x
Open Unix 8.0
Novell ODI
Novell Netware
SUSE Linux Enterprise Server 9.0
Red Hat Enterprise Linux*4.0
Linux
FreeBSD
Sun Solaris
Microsoft DOS
VMWare ESX*
Order information:
M/N | Description |
LREC9232MT | P PCI-Express x1 10/100/1000Mbps 1*RJ45 Network Lan Card (RTL8111F Based) |
PS: The above details are only for reference, if there are any changes, no prior notice.
Address:
C4 Bldg., Xintang Industry Zone, Baishixia Fuyongtown, Bao"an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics
Company Introduction:
Shenzhen Lianrui Electronics Co., Ltd(LR-LINK) is a scientific and technological enterprise professionally engaged in ethernet network adapter card(short for fiber nic) R&D, production, sale and service, and commit to the application and development of network card inChina. We′ve established tight cooperation with domestic and overseas well-known chipset manufacturers, like TI, Intel, Broadcom, Marvell, Cavium, Realtek, Icplus; Sticking to this development strategy "independent R&D, continuous innovation, be concentrated, be refined, be strong". Remember company′s tenet strive for survival on the basis of quality, strive for development on the basis of innovation, working hard to contribute to our country at any time; Always regarding developing people bran as our responsibilities and duties.