Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA66 product lubricated for improved flow and offers superior surface appearance
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||||||||
Vydyne CSD. Available in black, It is specifically designed to maximize toughness, while retaining physical properties. This product is also lubricated for improved flow and offers superior surface appearance.Glass-fiber reinforced Vydyne resins provide higher heat distortion temperature, resistance to creep and better dimensional stability when compared with unreinforced PA66. These products have good chemical resistance to a broad range of chemicals including hydraulic fluids and most solvents.Typical Applications/End Uses:Vydyne R413H BK07 is successfully used in a wide range of injection-moldinG Eineering applications, including automotive clips, fasteners, brackets and carbon canisters; electrical connectors, housings, bobbins, etc.; and industrial gears, bearing shells, covers, housings, etc. | |||||||||
General | |||||||||
Form | Resin Pellets | ||||||||
Filler | 15 % Glass Fiber | ||||||||
Feature |
Chemical Resistant Good Dimensional Grease Resistant Good Tensile Strength |
Creep Resistance Excellent Processability Good Thermal Solvent Resistant |
Fuel Resistant Ductile High Mechanical Strength And Rigidity |
||||||
UL Yellow Card | E70062-101337332 | ||||||||
Uses | Automotive Under The Hood | Lawn And Garden Equipment | |||||||
Physical | Nominal Value | Test Method | |||||||
Density, dry | 1.21 g/cm³ | ISO 1183 | |||||||
Dry: Molding Shrinkage, Across Flow(23 °C;2 mm) | 0.80 % | ISO 294-4 | |||||||
Dry: Molding Shrinkage, Flow(23 °C;2 mm) | 0.70 % | ISO 294-4 | |||||||
Dry: Water Absorption(24 hr;23 °C) | 1.0 % | ISO 62 | |||||||
Dry: Water Absorption, Equilibrium(50% RH;23 °C) | 1.9 % | ISO 62 | |||||||
Mechanical | Nominal Value | Test Method | |||||||
Dry: Tensile Modulus(23 °C) | 5500 MPa | ISO 527-2 | |||||||
Condition: Tensile Modulus(23 °C) | 4100 MPa | ISO 527-2 | |||||||
Dry: Tensile Stress, Break(23 °C) | 110 MPa | ISO 527-2 | |||||||
Condition: Tensile Stress, Break(23 °C) | 80.0 MPa | ISO 527-2 | |||||||
Dry: Tensile Strain, Break(23 °C) | 5.0 % | ISO 527-2 | |||||||
Condition: Tensile Strain, Break(23 °C) | 13 % | ISO 527-2 | |||||||
Dry: Flexural Modulus(23 °C) | 4800 MPa | ISO 178 | |||||||
Condition: Flexural Modulus(23 °C) | 2800 MPa | ISO 178 | |||||||
Dry: Flexural Stress(23 °C) | 140 MPa | ISO 178 | |||||||
Condition: Flexural Stress(23 °C) | 73.0 MPa | ISO 178 | |||||||
Dry: Poisson's Ratio | 0.40 | ISO 527-2 | |||||||
Dry: Charpy Notched Impact Strength -40 °C -30 °C 23 °C |
5.0 kJ/m² 6.0 kJ/m² 12 kJ/m² |
ISO 179 | |||||||
Condition: Charpy Notched Impact Strength -40 °C -30 °C 23 °C |
5.0 kJ/m² 10 kJ/m² 18 kJ/m² |
ISO 179 | |||||||
Dry: Charpy Unnotched Impact Strength -30 °C 23 °C |
75 kJ/m² 80 kJ/m² |
ISO 179 | |||||||
Condition: Charpy Unnotched Impact Strength -30 °C 23 °C |
70 kJ/m² 76 kJ/m² |
ISO 179 | |||||||
Dry: Notched Izod Impact Strength -40 °C -30 °C 23 °C |
9.0 kJ/m² 10 kJ/m² 12 kJ/m² |
ISO 180 | |||||||
Notched Izod Impact Strength: condition -40 °C -30 °C 23 °C |
9.0 kJ/m² 10 kJ/m² 21 kJ/m² |
ISO 180 | |||||||
Thermal | Nominal Value | Test Method | |||||||
Dry: Heat Deflection Temperature, Unannealed | |||||||||
0.45 MPa | 258 °C | ISO 75-2/B | |||||||
1.8 MPa | 235 °C | ISO 75-2/A | |||||||
Dry: Melting Temperature | 260 °C | ISO 11357-3 | |||||||
Dry: CLTE, Flow(23 - 55 °C;2 mm) | 3.0E-5 cm/cm/°C | ISO 11359-2 | |||||||
Dry: CLTE, Transverse(23 - 55 °C;2 mm) | 1.1E-4 cm/cm/°C | ISO 11359-2 | |||||||
Dry: Flame Rating 0.75 mm 1.5 mm 3 mm |
HB HB HB |
UL 94 | |||||||
Electrical | Nominal Value | Test Method | |||||||
Dry: Volume Resistivity(0.75 mm) | 1.0E+9 ohms ·cm | IEC 60093 | |||||||
Dry: Dielectric Strength(1 mm) | 3.0 kV/mm | IEC 60243 | |||||||
Dry: Arc Resistance(3 mm) | PLC 6 | ASTM D495 | |||||||
Dry: Comparative Tracking Index(3 mm) | 400 - 599 V | IEC 60112 | |||||||
Dry: High Amp Arc Ignition, HAI | |||||||||
0.4 mm | PLC 1 | UL 746 | |||||||
1.5 mm | PLC 1 | UL 746 | |||||||
3 mm | PLC 1 | UL 746 | |||||||
0.75 mm | PLC 1 | ASTM D257;IEC 60093 | |||||||
Dry: High Voltage Arc Tracking Rate, HVTR | PLC 3 | UL 746 | |||||||
Dry: Hot-wire Ignition, HWI | |||||||||
0.4 mm | PLC4 | UL 746 | |||||||
0.75 mm | PLC4 | UL 746 | |||||||
1.5 mm | PLC4 | UL 746 | |||||||
3 mm | PLC4 | ASTM D257;IEC 60093 | |||||||
Processing | Nominal Value | ||||||||
Drying Temperature<Injection> | 80 °C | ||||||||
Drying Time<Injection> | 4.0 hr | ||||||||
Suggested Max Regrind <Injection> | 25 % | ||||||||
Rear Temperature<Injection> | 280 - 310 °C | ||||||||
Middle Temperature<injection> | 280 - 310 °C | ||||||||
Front Temperature<Injection> | 280 - 310 °C | ||||||||
Nozzle Temperature<Injection> | 280 - 310 °C | ||||||||
Processing Temp, Melt<Injection> | 285 - 305 °C | ||||||||
Mold Temperature<Injection> | 65 - 95 °C |
Forever Co.,Ltd