O Ring Cord Splicing Kits

This O-Ring splicing kit is made of Black Buna-N, has a durometer of 70A, and includes 14 pieces of o-ring cord in metric & inch cross sections, 2 meter of cord per piece. The cord has a Round cross-section and can be used across a wide temperature range from -67 degrees F (-55 degrees C) to 257 degrees F (125 degrees C). The splicing kit comes in a plastic box with lid card, instructions, cord stock, splicing jig, cutting tool, and adhesive.

The kit includes the following cord sizes: 2 Meter of 1.78mm, 2mm, 2.4mm, 2.62mm, 3mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.7mm, 6mm, 7mm, 8mm O-Ring Cord Stock.

Buna-nitrile can have high tensile strength, as well as abrasion, tear, and compression set resistance. It is compatible for use with petroleum, hexafluoroacetone (HFA), hexafluoro-2-butyne (HFB) and hydrofluorocarbon (HFC) fluids, vegetable oil, alcohol, acids, and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering, and should not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light.

The durometer hardness of this Buna-N O-Ring cord is 70A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for rubber, while shore D is used for harder plastics.

What's in the box?

• 2 Meter of 1.78mm, 2mm, 2.4mm, 2.62mm, 3mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.7mm, 6mm, 7mm, 8mm O-Ring Cord Stock
• Splicing Jig, Cutting Tool, Adhesive, Knife and Measuring tape.

O-Ring Kit Varieties