Multifunctional Auto Open Pneumatic 3D Sublimation Vacuum Heat Press
This automatic 3D vacuum Heat press machine is widely used for transfer image for T shirts, cloth, mouse pads, phone cases,plates, mugs, special shap mugs, sport bottles, etc.
|Voltage:||110V/220V manual adjust|
|Control mode:||Touch screen|
|Machine color:||Silver with black, can be customized if large quantities.|
|Working mode:||Auto-pneumatic,comes with air pump|
|Transfer Parameter:||Five saving settings,choose freely.|
|Transfer products:||3D film,phone cases, mugs,t-shirts,etc|
1. Large touch screen design,fashionable and beautiful.
2. Five saving settings,switch quickly.
3. Automatic,manual mode,save and fast.
4. Scram,start setting,safe and easy.
5. Up and down heating,make heating more even.
6. Two temperature display:Fahrenheit and Centigrade.
7. Processing capacity can be checked.
8. Quantitative counting,you can preset processing capacity when bulk processing,machine will warn you when arrives.
9. Fast lifing boart design,adapt to different product height.
10. Drawer design,easy operating.
> Well-designed user interface.
> Easy operation. Only needs to set the temperature and time.
> Needs no operations other than placing the workpieces in and taking them out.
For Sublimation Phone Case:Need to complete the transfer of hard copy tray.
1. Plugs, turn the power button.
2.The need to set the time and temperature (about 190 ºC and 380 seconds, depending on the phone shell and environmental regulation), please refer to Appendix to set the time and temperature.
3. When the machine is at elevated temperatures, prepare a blank cell phone shell, handle cabinet placed in a mold, with a high temperature tape the printed sublimation paper tied up on the phone shell, then transfer into the tray and close it. (Ensure that enough room left empty shell phone location).
4. Open the door when the temperature reaches a predetermined temperature, the transfer tray onto shelves (to ensure the transfer tray in the middle of the shelf), press the button until the air vacuum transfer tray is smoked.
5. After closing the door the machine will automatically countdown, when the time, open the door warning light activated. Remove the transfer tray, torn paper sublimation.
For Sublimation Mug:Requires matching mug fixture.
1. Plugs, turn the power button.
2. The need to set the time and temperature (about 210 ºC and 400 seconds), please refer to Appendix to set the time and temperature.
3. When the machine is in warming up, ready mug. Heat tape printed with the sublimation paper tied on mug, mug wrapped jig.
4. Open the door when the temperature reaches a predetermined temperature, the mug onto shelves (ensure that enough room left empty cup position).
5. After closing the door the machine will automatically countdown, when the time when, after the warning lamp starts to open the door, took the cup, and paper off fixture.
DIY pictures you like on cases,t shirts,mugs,plates so on by heat press,you need our heat press printer to realize your idea.
We can supply full set sublimation products and technical service.
2. Sublimation heat press printer,we can supply.
3. As for sublimation cases printing,sublimation cases, metal mold,sublimation ink,sublimation paper are in need,we can supply you.
4. As for mugs,plates printing,sublimation mugs or plates,mug or plate clamps are in need,we can supply clamps,mugs or plates can be bought in your locals,because these are easy to break in the transportation. For material,there are glass, pottery and plastic. Any material must bear 200 degrees or more and have sublimation layer.
5. Heating press on nylon or polyester clothes need sublimation ink and paper. Heating press on cotton clothes need dye sublimation ink and transfer paper. We can supply.