Multi-Station Underwear Sublimation Heat Press Transfer Printing Machine

2, Main uses
The pneumatic dual station hot stamping machine can heat transfer the colored patterns and texts of sublimation and solvent inks onto fabrics and ceramic products such as cotton, linen, synthetic fibers, nylon, etc. It can also perform heat treatment such as hair grafting hot stamping and foaming printing processes, as well as the bonding of low-temperature and low-pressure lining of clothing with fabrics, such as clothing, shoes and hats, and can also be used for the production of small items
Batch handkerchiefs
3, Product features:
The pressure adopts a built-in cylinder device, which can convert smaller pressure into strong compression force. The machine head moves without the workbench moving, making it easy to discharge materials without moving. The pressure can be adjusted freely, and it is widely used for electronic digital display temperature control in factory assembly lines, with high accuracy (± 2 ºC);
Heating adopts the principle of imported aluminum alloy casting thermal conductivity, which saves electricity, has uniform temperature, and a small temperature difference coefficient; Electronic digital time control
Made with high accuracy and aesthetics; Pressure can be adjusted freely
4, Operation steps
1. Connect the compressor connector, open the air pressure, adjust the pressure gauge (4pB-6pB), and raise the heating plate; 2. Connect the air switch, turn on the main power switch, and the indicator light will immediately turn on.
3. After adjusting the required time and temperature, wait for the machine to heat up.
4. After the heating is completed, the temperature gauge OUT1 light goes out and automatically flashes (during insulation), starting the test for clothing
Place the item flat on a silicone pad, press it flat, put it into a hot stamping paper (pay attention to the front and back of the paper), and then put it on high temperature
Push the cloth directly into the left sliding table, move it to the working position of the sliding table close to the switch position, press down the cylinder, and hot stamping begins.
5. After the set time, the heating plate will automatically rise, move the right sliding table to the position close to the switch inside the workbench, and repeat the hot stamping process.
6. Adjust the machine to the best effect based on the trial printing effect. If the item being scalded is a cold torn art paper, please wait for 5-10 seconds before removing it. If it is a hot torn art paper, please immediately remove it after hot stamping
7. After successful trial printing, you can turn the conversion switch to the left to automatic mode. After placing the hot stamping item, simply move the handle directly above the hot stamping item, and the hot stamping will start automatically. In case of emergency, you can press the emergency stop button. At this time, the upper pressure plate (heating plate) will automatically rise. After the emergency stop button is reset, hot stamping can continue.


After sales service:
Thank you for purchasing our company's products. Our company adheres to the goal of survival through quality and development through reputation, and has made tremendous efforts in machine production, technical research, and after-sales service over the years. We promise you with high-quality products:
1. The machine is guaranteed for one year. Within one year of use, if the machine malfunctions due to non-human factors, our company is responsible for free repair
Send accessories.
2. If the machine is damaged or malfunctions occur due to customer failure to install as required or improper operation, maintenance, or transportation
Unfortunately, our company is responsible for repairs and technical guidance, and only charges the cost of accessories.
After the one-year warranty period, if the machine malfunctions, our company is responsible for repairing it and only charges the cost of accessories.




Heat transfer press machine Features: